Nick1234 Posted August 13, 2004 Report Posted August 13, 2004 Okay so i started installing my bulldog alarm today. Got the wires for keyless enty hooked up, the a few more for the siren, but am not totally done. Right now, it arms itself and locks the doors, and sometimes it will go off if you unlock the door w/o disarming, and when you do hit the disarm button, it doesnt unlock the door. i hope i can figure this out. Any experience and advice would be great. nick Quote
supreme_style21 Posted August 13, 2004 Report Posted August 13, 2004 Not familiar w/Bulldog stuff, but I assume 'disarm' is supposed to unlock the doors as well? Quote
tloftus Posted August 13, 2004 Report Posted August 13, 2004 Experience says throw that bulldog sh*t out the window and buy a real alarm. No really, just make sure you have your wires going from the relays to the right wires on the door locks, try switching them and see if hitting the unlock makes it lock, you probably just have your unlock from your alarm going to the wrong wire in the door. This is the best site in the world for stereo / alarm installs. http://www.the12volt.com Check it. T Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.