Psych0matt Posted July 31, 2004 Report Share Posted July 31, 2004 so I got the DIS all installed and junk a while back, but for some reason all the trip meters and stuff arent working. Now, i knew the gas efficiency wasn't going to work, but does anyone know if it the trip stiff is supposed to work, and what I may have done wrong? I can set it just fine, but it will always say that i still have that many miles to go. Quote Link to comment Share on other sites More sharing options...
Baddflash Posted August 1, 2004 Report Share Posted August 1, 2004 Do you not have the speed and fuel inputs connected? If not I don't believe it will work. Quote Link to comment Share on other sites More sharing options...
GutlessSupreme Posted August 1, 2004 Report Share Posted August 1, 2004 I don't know if any of that stuff will work.. all that data comes from the ALDL connector under the dash and I think the info in the datastream changed in '94 because of OBD 1.5.. so the DIS can input the data right :? Quote Link to comment Share on other sites More sharing options...
Psych0matt Posted August 1, 2004 Author Report Share Posted August 1, 2004 I have the one line from the aldl connector, and one from behind the cluster... the "guages" work, and the avg speed and stuff work too. am I missing something *scratches head Quote Link to comment Share on other sites More sharing options...
Baddflash Posted August 3, 2004 Report Share Posted August 3, 2004 How about the fuel level input? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.