Ramma2 Posted July 9, 2004 Report Posted July 9, 2004 My ABS light comes on while I'm drivng, but is not on when I start the car. If I do the H pin short to pull the code, will it still flash the codes to me? Quote
DiscoStudd Posted July 9, 2004 Report Posted July 9, 2004 No, you need to take it to a brake shop or the dealer. My Regal just started doing the same thing a couple of days ago and it was suggested to me from a mechanic friend that one of my wheel sensors might be bad, but he told me to bring it in to get scanned cause there's no other way to scan the ABS computer (sorry, EBCM )... Quote
supreme_style21 Posted July 10, 2004 Report Posted July 10, 2004 No there is a way to pull the codes if its OBD1. I had the instructions on my computer at one point in time, but I'll be dammed if I can find 'em. This is the only thing I have from it right now http://gra.midco.net/rondorf/untitled.bmp Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.