cutty Posted July 7, 2004 Report Posted July 7, 2004 i had three of my dash lights go out, and was wondering as to where to get some new ones..can i just goto a car parts store and get them their?? and also i need to know the bulbs numbers, 2 bigger ones, with green caps...and a lil one with a gray cap.. Quote
jeremy Posted July 7, 2004 Report Posted July 7, 2004 1. Remove guage cluster 2. Locate burnt bulb(s) 3. Remove burnt bulb(s) 4. Bring bulbs to parts store 5. Buy new bulb(s) 6. Install new bulb(s) 7. Reinstall guage cluster. Quote
cutty Posted July 7, 2004 Author Report Posted July 7, 2004 i have the bulbs out already, and i wasnt sure i could goto pepboys and pick them up, since they dont look like regular bulbs Quote
93GTP Posted July 7, 2004 Report Posted July 7, 2004 Yeah, they are those peanut bulbs (151's or something) with the special bases. I wasn't sure if I could get them at just any parts store when I replaced several of mine, so I went to the dealership. It wasn't too expensive either. There were also a couple in Dad's tool box from some old Fords and they were identical. Quote
cutty Posted July 7, 2004 Author Report Posted July 7, 2004 ill check out pepboys first then ill goto the dealer to see Quote
jeremy Posted July 7, 2004 Report Posted July 7, 2004 you can buy them at Wally World around here..... Quote
cutty Posted July 7, 2004 Author Report Posted July 7, 2004 ive never heard of a wally world...ill just check pepboys then if not ill goto the dealer Quote
jeremy Posted July 7, 2004 Report Posted July 7, 2004 ive never heard of a wally world...ill just check pepboys then if not ill goto the dealer wally world = Wal-mart Quote
cutty Posted July 7, 2004 Author Report Posted July 7, 2004 ohhhhhh you can tell how stupid i am then Quote
5speedz34 Posted July 7, 2004 Report Posted July 7, 2004 Hey Jeremy, I work at walmart and we carry the bulbs but not the bases, so you gotta soder them in. Quote
runt Posted July 7, 2004 Report Posted July 7, 2004 Don't the bases just pull off and then you can push them onto the new bulb? Quote
cutty Posted July 7, 2004 Author Report Posted July 7, 2004 i have tried looks like they are one piece to me Quote
sl3196 Posted July 7, 2004 Report Posted July 7, 2004 Are the they same type that are in my d.i.c? I was able to pull them out but it was a pain in the ass. I broke one bulb but I did get them out. Quote
cutty Posted July 7, 2004 Author Report Posted July 7, 2004 not sure if they are the same or not, i tried pulling on the bulb pretty hard, but i didnt want to break it.. Quote
sl3196 Posted July 7, 2004 Report Posted July 7, 2004 What I did was grab the base with pliers and put my shirt over the bulb, then just pulled really hard. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.