MommyTaz022200 Posted July 6, 2004 Report Posted July 6, 2004 Before I bought my car the front was smashed a little by a deer. I'm not sure if there is a bracket missing, or if the B4U front end is just different, but I can't figure out what these bolt holes would bolt to. Can someone PLEASE!!! take a picture of where this bracket goes to? Quote
jeremy Posted July 6, 2004 Report Posted July 6, 2004 can't see much in that picture.....you might also want to take one farther away to show the location better... Quote
5speedz34 Posted July 6, 2004 Report Posted July 6, 2004 It looks like its right by the hood latch. Quote
MIKELABZ Posted July 6, 2004 Report Posted July 6, 2004 take a pic of the car with the hood down and maybe we can compare cars to see if whats missing on the outside of your car shows up on the outside of a similar car.... Quote
MommyTaz022200 Posted July 7, 2004 Author Report Posted July 7, 2004 These are about the best pictures I can get. The lighting n my garage sucks, and these are with the flash on and another light. With the hood closed you can not see this area, so I didn't take any pictures with the hood closed (it's not on the car right npw anyway). The frame is an LE, the front bumper is a B4U. I would think that a non B4U 2 door would have the same bracket too. Quote
MommyTaz022200 Posted July 8, 2004 Author Report Posted July 8, 2004 Can't anyone take a picture of this for me, or is it still too hard to tell what I am talking about? Quote
GP1138 Posted July 8, 2004 Report Posted July 8, 2004 These are about the best pictures I can get. The lighting n my garage sucks, and these are with the flash on and another light. With the hood closed you can not see this area, so I didn't take any pictures with the hood closed (it's not on the car right npw anyway). The frame is an LE, the front bumper is a B4U. I would think that a non B4U 2 door would have the same bracket too. Oil/Trans fluid cooler maybe? Do the threads look like they've been used recently? Quote
Guest TurboSedan Posted July 8, 2004 Report Posted July 8, 2004 could it possibly be for the outside temp sensor bracket? Quote
Heza Posted July 8, 2004 Report Posted July 8, 2004 could it possibly be for the outside temp sensor bracket? no. im gonna go look under my hood in a minute. Quote
Heza Posted July 8, 2004 Report Posted July 8, 2004 another bracket that you are missing is what it is. looky looky.... Quote
GP1138 Posted July 8, 2004 Report Posted July 8, 2004 Ohhh yeah.. i remember that, I had to replace my hood latch because my hood got fuxx0red. Quote
MommyTaz022200 Posted July 9, 2004 Author Report Posted July 9, 2004 Cool, that's what I needed. Thanks Heza. I knew it was some kind of bracket, but I got a bunch I pulled from the front clip on the doner B4U. I figured I'd remember which brackets belonged to what, but now when they are in the bottom of my toolbox they don't look so obvious as to which go where. Now I got to go check and see if I got one like that, so my front end isn't just resting on the top of the metal bumper bar. Quote
Heza Posted July 10, 2004 Report Posted July 10, 2004 you are very welcome. any other B4U questions, just ask. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.