grandprix89 Posted June 19, 2004 Report Posted June 19, 2004 hey to all..today i had to remove the TPS and when i installed it back i get a check engine code...such that my tps value is incorrect, either too high or too low(i have a 2.8 L v6 engine in my grand prix with adjustable TPS) could anyone tell me what voltage it should read at idle, ( closed throttle)...right now i have a 0.55V reading,.. to check this i put the ignition on ON, engine not running, and i connected a voltmeter from the dark blue wire(positive)..and get a ground somewhere on the car.. thankx Quote
Crimson Fury Z Posted June 19, 2004 Report Posted June 19, 2004 i dunno if thats all the same on the 60* tps', i installed my new one, and got the car running, letting it go for 15 minutes, then taking it out on a drive, and after i got back, things were ok. Quote
god910 Posted June 20, 2004 Report Posted June 20, 2004 I remember .45 for some reason it's stuck in my head. it should be in the manual. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.