TeeJay3800 Posted February 18, 2004 Report Posted February 18, 2004 Why does the 3.1 have unequal length intake runners? Maybe they're not, but from the pic linked below, they sure look unequal length. Is this common on many engines or is it somewhat unique? http://koti.utanet.fi/~juho/jzu45/images/31rear.jpg Quote
Vegeta Posted February 18, 2004 Report Posted February 18, 2004 Look at the plenum....the front runners go up inside further to the plenum to make up the lower's difference. Quote
Brian P Posted February 18, 2004 Report Posted February 18, 2004 yes, this can be seen quick by the position of the throttle body being so close to the rear. Quote
Baddflash Posted February 24, 2004 Report Posted February 24, 2004 It was obviously a poor design, ie 3100. Quote
Vegeta Posted February 24, 2004 Report Posted February 24, 2004 what are you talking about exactly? Quote
Brian P Posted February 24, 2004 Report Posted February 24, 2004 yeah...runners usually equal a bad design, act like you don't knw0! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.