4spdz34 Posted December 19, 2003 Report Share Posted December 19, 2003 95 3.4 crate engine ported and decked heads head gaskets are .020 thinner than stock and i have 7 hours to pull the old motor and put the new one in and drive away, anyone wanna bet i can't do it? my dad is gunna help me i will try and take some pics with the digital camera, but i have no idea how to host them so if someone wants to help me that would be awsome Quote Link to comment Share on other sites More sharing options...
5speedz34 Posted December 20, 2003 Report Share Posted December 20, 2003 I'll host them..... Quote Link to comment Share on other sites More sharing options...
gp90se Posted December 21, 2003 Report Share Posted December 21, 2003 in under 2 hours of work I had my 3.1 out with tranny and wiring harness. i tossed in the 3.4, havent touched it in a while, gunna get back on it this week. Me and my buddy can do a 350/th400 swap in 8 hours, I think if we pushed ourselfs we could do my 3.4 swap in bout that same time (more wires and vaccume lines). good luck. -Jeff Quote Link to comment Share on other sites More sharing options...
4spdz34 Posted December 21, 2003 Author Report Share Posted December 21, 2003 well it took us from midnight to 7:30. but there are stil some things wrong the friggin alt won't charge, its a reman, it was charging and now it doesn't. but other than that evrything is fine motor wise. i forgot to unplug the abs wheel speed sensors before i dropped the cradle, needless to say those wires have to be spliced now. i haven't been beating on it but the thing has way more power, it takes less throttle to get it going then it used to Quote Link to comment Share on other sites More sharing options...
dykz34 Posted December 21, 2003 Report Share Posted December 21, 2003 Cool. What tranny is in there? I thought you blew yours up? Quote Link to comment Share on other sites More sharing options...
5speedz34 Posted December 21, 2003 Report Share Posted December 21, 2003 Josh said that it ripped his tires so much the popped, I doubt its that fast then. Quote Link to comment Share on other sites More sharing options...
4spdz34 Posted December 23, 2003 Author Report Share Posted December 23, 2003 tony u believe anything, but i have another rebuilt 4t60e with a few more mods, butg i learned nopt to brake stall the trans. the new motor is pretty nice but that damn alt i bought is bad, don't buy reman alts!!!! so tommorow i will replace trhat Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.