Anyone re-pin an electrical connector on these?

[crazyd]

I found a replacement plug for my air temp sensor on a junkyard car and am trying to get the wires out of it. I've got a round multi-tool for this that I got on Amazon that has five different tools on it but so far it looks like only the smallest straight-blade tool fits. I pushed the wires through the front of the replacement plug but that doesn't seem like the right way to do it.

[Schurkey]

You have 'em out of the front of the plastic connector body.  Examine the lock-tabs, determine how to release them from the front, so they pull out the rear.

[crazyd]

Wow, did I catch you on a bad day?

[Schurkey]

The connector body has to come apart somehow--there's likely a plastic lock-tab or two on the body, so the rear "end cap" and weather-seal comes off.  Then slide your tool into the gaps from the front, to release the metal lock-tabs on the wire terminals, and pull the wires out the rear.