Can't get the steering wheel controls to work with the Pac Swi-X controller

[Dark Ride]

The new switch is aftermarket unfortunately, I couldn't find any new acdelco ones. The cam is definitely busted, some of the emitters are broken off. Guessing someone screwed it up last time they replaced the signal switch. A nearby junkyard may have a steering column with srwc, would any 89-93 column work as long as it has swrc? Would the later years be better as they improved the design?

[jman093]

The new switch is aftermarket unfortunately, I couldn't find any new acdelco ones. The cam is definitely busted, some of the emitters are broken off. Guessing someone screwed it up last time they replaced the signal switch. A nearby junkyard may have a steering column with srwc, would any 89-93 column work as long as it has swrc? Would the later years be better as they improved the design?

I would think any 89-93 SWRC would have it. 94+ won’t work. It uses a clockspring.

[Dark Ride]

Ok I'll see if I can find an 89 - 93.

[Dark Ride]

Got one from a 93. The rings on the back side are really dirty though, what kind of grease do they use on these? Planning to clean the old stuff off since it's so nasty.

[Imp558]

I use white lithium for that stuff (Vaseline)

[Dark Ride]

Finally got this installed and put back together. I hooked up the tool I bought to perform the tests and the brand new turn signal failed one of the tests, nothing where battery voltage should be. So I basically gave up on getting them to work and finished reassembling it anyway. Put it all back together and figured I would try to program it one last time before removing it and it worked! I was able to completely program everything and the steering wheel controls now control the deck. Not sure how but I'm not complaining. One weird issue I noticed after I put it back together though. The blinkers work as intended unless I turn the headlights on, then they won't flash, just solid. Any idea what would cause that or where I should look?

[Nas Escobar]

Check the brake lights and marker lights with them on. You might have a bulb out that wont flash the 2nd filament.

[Dark Ride]

Finally got this fixed.  It was a bad flasher.  Seems obvious in hindsight.

[Nick727]

can someone post a link(s) or part #'s or the exact type for SWC adapter for my 93 cutlass. I'm having no luck finding one. Thanks

[Pontiac6KSTEAWD]

I know I have one NOS in my my Parts Stash, and theres another member wanting to buy some parts out of that box... I just gotta find it in my garage..

Kids... Dont hoard stuff.. When you want something, you will NEVER find it!

Edited May 9 by Pontiac6KSTEAWD

[Nick727]

14 hours ago, Pontiac6KSTEAWD said:

I know I have one NOS in my my Parts Stash, and theres another member wanting to buy some parts out of that box... I just gotta find it in my garage..

Kids... Dont hoard stuff.. When you want something, you will NEVER find it!

That would be amazing!! Please keep me posted.

[Pontiac6KSTEAWD]

On 5/10/2024 at 4:05 AM, Nick727 said:

That would be amazing!! Please keep me posted.

I can see the box in the back of my garage. Still can not get to it at the moment... Getting there!

[Nick727]

Thanks I really appreciate the update. Just keep me posted. Thanks again.

[Nick727]

On 5/28/2024 at 2:55 PM, Pontiac6KSTEAWD said:

I can see the box in the back of my garage. Still can not get to it at the moment... Getting there!

any luck on finding it?

[Pontiac6KSTEAWD]

I got to the box last night, after removing a bunch of garage crap (lawn mowers, snow blowers, etc)..

I did not open the box yet..

[Pontiac6KSTEAWD]

Check your PM.. Sent you a message about it.