John M Posted June 2, 2015 Report Share Posted June 2, 2015 I looked for the post I made asking for help on this issue ,but cannot find. The '95 Cutty would 'cam' at start up, (idle would bounce up to 3000+ and down low and would stall). Cold made this worse. Once engine warmed up problem went away. My mech found a vaccuum leak under the intake/plenum. I did not see the part, it was a special grommet under the top of the motor. It took days for the part to come in (rare?) My mech considers the 3.4 a rare engine, I don't. So not sure if the grommet fixed the problem or if taking it apart and putting it back together fixed it. It is fixed thankfully. Almost $600 though... Hope this helps someone else. Quote Link to comment Share on other sites More sharing options...
George Posted June 2, 2015 Report Share Posted June 2, 2015 Thanks for the update, it's nice to get some satisfaction after all our toils. I'm glad she runs well again! Quote Link to comment Share on other sites More sharing options...
John M Posted June 3, 2015 Author Report Share Posted June 3, 2015 I am going to see if my daughter wants to sell. She does not have the $$ to pay for the fixes. So I pay and she drives it....... Quote Link to comment Share on other sites More sharing options...
Schurkey Posted June 8, 2015 Report Share Posted June 8, 2015 What's the part number of this "special grommet"? Quote Link to comment Share on other sites More sharing options...
Psych0matt Posted June 8, 2015 Report Share Posted June 8, 2015 What's the part number of this "special grommet"? More than that, what IS this special grommet? Quote Link to comment Share on other sites More sharing options...
John M Posted June 9, 2015 Author Report Share Posted June 9, 2015 I called it a grommet might just be a gasket, they replaced many. Manifold,EGR, fuel injector O-rings and others. Not sure if that 'special one' fixed the problem or one of the others did. Part # 24506744 is an oil related part. They had to order the part and it was hard to find/get. I could post the invoice if some one wants it. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.