Jump to content

Aftermarket/Other Stock Wheels on 7th Gen Grand Prix


pwmin

Recommended Posts

Hmmm, I guess I have an advantage for that then :lol: I have mine cranked pretty low on the coilovers and have almost zero rub. I mean if I hit a dip hard enough I do, but that's like maybe once a year, usually on the freeway on the way to a meet!

Link to comment
Share on other sites

  • Replies 114
  • Created
  • Last Reply

Top Posters In This Topic

  • pwmin

    65

  • Psych0matt

    19

  • Nas Escobar

    13

  • The Guz

    9

Top Posters In This Topic

Posted Images

I wish 19" tires weren't so damn expensive. I think I prefer the 19" Kosoku at this point, but I have to think about tires in the long term as well as up-front cost. The less I spend, the more my credit card gets paid down.

Link to comment
Share on other sites

I'm looking at about $1600 for 19" wheels and tires and $200 more for tires each time I have to buy them. 18's are around 1200-1300 and obviously cheaper to replace tires, but I would get the F11's and would have to polish them. At least the Kosoku are "bright" silver.

Link to comment
Share on other sites

Looks like I'm not getting those wheels and I already paid for them so I have to wait for the refund to buy other wheels. My only hope is I can get them from the manufacturer because I can't find them anywhere else. 1010tires sucks. I already ordered the tires so I can't order those 18s now.

Link to comment
Share on other sites

I think those will look hot! Been toying with the idea of picking up something similar used, but I'm not sure if I'd want them for the GTP or the 04 :lol:

Link to comment
Share on other sites

...and those are on backorder, too. FML! Can't find anyone else that supposedly has those. Now I'm fucked because I have to wait for my money to be refunded before I can order anything else. At least discounttire didn't charge me until the order was shipped.

 

either these

http://www.amazon.com/Konig-Airstrike-Offset-Partnumber-AS98514355/dp/B00354PEXG/ref=sr_1_1?ie=UTF8&qid=1425335311&sr=8-1&keywords=konig+airstrike+19x8.5+5x114.3

 

http://www.amazon.com/Konig-Airstrike-Offset-Partnumber-AS98514355/dp/B00354PEXG/ref=sr_1_1?ie=UTF8&qid=1425343479&sr=8-1&keywords=konig+airstrike+5x114.3+19x8

t_20130613.konast.bkglms.ang.jpg

 

or (will have to strip and polish)

http://www.discounttiredirect.com/direct/findWheelDetail.do?bp=5-114.30&fl=&yr=2004&pc=16276&counter=1&wd=19&rw=8.5&vid=007897

t_20130531.prvkul.bkmtxx.ang.jpg

Edited by pwmin
Link to comment
Share on other sites

milan on ebay...

 

http://www.ebay.com/itm/13-15-Ford-Escape-19x8-5-5x4-5-45-72-6-Niche-Milan-M135-Wheels-Rims-Silver-/301532399658?pt=Motors_Car_Truck_Parts_Accessories&hash=item4634bb482a&vxp=mtr

 

ordered them on ebay. They better have them in stock. I had just enough money left to cover it. Supposed to arrive by next Thursday...we'll see.

Edited by pwmin
Link to comment
Share on other sites

I think those will look hot! Been toying with the idea of picking up something similar used, but I'm not sure if I'd want them for the GTP or the 04 :lol:

I've been pretty patient, at least until I had two sets come up backordered, but IDK if I would have the patience to try and find something on CL.

 

I like the concave-ness to those

I was a bit worried I wouldn't like it at first, but I'm sure I will now. I think they are the nicest looking wheels I've come across so far, at least as far as 5-spokes that will look good on a w-body, anyway. I think they're bright enough that I won't be worried about polishing them. I figured it was sort of ridiculous to spend that much money and have to polish them, but I would have if needed. The Airstrike I can only find in black now, but I would probably let them go as is, at least for a summer. If for some reason these aren't in stock, which they should be, I think I'm just going to go with the Airstrike unless someone comes up with something better.

 

My plan was to polish the stock wheels when I put these on and keep using them for snow tires, but I'm thinking about going black or gunmetal with them. They have some curb rash, so I need to address that over the summer anyway, but polishing them is going to be a chore.

Edited by pwmin
Link to comment
Share on other sites

I'm all about finding used stuff at good prices, but when I only paid $1100 for the car I'm not spending that much on wheels and tires :lol: I'm hoping to either find something with good tires, or else I'll strip and refinish my first gen five spokes and put decent summerish tires on

Link to comment
Share on other sites

I wouldn't, either. If I wasn't getting a good tax return, I wouldn't be spending this much. I've just never had nice a/m wheels on a car and it's time.

Link to comment
Share on other sites

And their stock was incorrect. They have the m134 though quick is the same wheel with a different coating so I'm getting that instead...our so they say. :roll:

Link to comment
Share on other sites

And their stock was incorrect. They have the m134 though which is the same wheel with a different coating so I'm getting that instead...our so they say. :roll:

Link to comment
Share on other sites

They will look good. They probably won't be as concave as the photo but still a good set of wheels.The +35 offset probably would have been. Surprised you didn't go with that offset.

Link to comment
Share on other sites

If they send the wrong wheels, couldn't you let them know, and maybe get a discount? I mean I sure as heck would try if they sent me the wrong thing

Link to comment
Share on other sites

They will look good. They probably won't be as concave as the photo but still a good set of wheels.The +35 offset probably would have been. Surprised you didn't go with that offset.

I don't care if they look very concave. I went with 45 so they would have less of a chance of rubbing. Hopefully I won't need any spacers. I did order hub centric rings.

 

If they send the wrong wheels, couldn't you let them know, and maybe get a discount? I mean I sure as heck would try if they sent me the wrong thing

I sure would hope so. I'm pretty confident I'll get the right ones. I finally got notification that they had been picked up by UPS, but I have to wait until Wednesday to get them :(

 

I hope everything works out, those wheels are going to look great!
Thanks! They should.
Link to comment
Share on other sites

I don't care if they look very concave. I went with 45 so they would have less of a chance of rubbing. Hopefully I won't need any spacers. I did order hub centric rings..

 

I run a +35 offset on 18x8's with 245/24-18's and I rolled the fenders. No rubbing what so ever. I am lowered as well. So you would have been fine with that offset. Hub rings are fine. I doubt you will need spacers.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...