Nas Escobar Posted December 18, 2013 Report Share Posted December 18, 2013 I want to install a viper alarm to my 1994 Cutlass Supreme. My car already has keyless entry from factory but only one remote. My question is how hard would it be to install an alarm ?? I've heard the keyless entry and trunk are simply wire tapping, but how hard is the rest? Quote Link to comment Share on other sites More sharing options...
Heartbeat1991 Posted December 19, 2013 Report Share Posted December 19, 2013 It's pretty much all wire tapping, with the exception of the starter kill. Even that is just a cut and splice. There are a lot of wires, but don't let that intimidate you. Just do them one at a time. And solder and heat shrink wherever you can. The hardest part is locating the wires in the car to hook up the alarm to. Quote Link to comment Share on other sites More sharing options...
Imp558 Posted December 19, 2013 Report Share Posted December 19, 2013 There was a link in here a few months ago to a site with free schematics for our cars, maybe one of the other guys will remember where it is and chime in. You'll want something, alldatadiy.com will have everything you need and if you search the internet for "alldatadiy coupon codes" you can have it pretty cheap. Don't expect a Haynes manual to be of use with wiring. Quote Link to comment Share on other sites More sharing options...
mhildebrand Posted December 19, 2013 Report Share Posted December 19, 2013 I use these diagrams for every camera installation that I do at work. I just installed a remote start yesterday into my 96 using this list: http://www.commandocaralarms.com/wiring/1994-1996/oldsmobile/cutlasssupreme/1697.html Not sure what you all need for the alarm, but the list is made up for installing an alarm. Also, I did not need to use the relay for the parking lights. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.