AL Posted June 18, 2013 Report Share Posted June 18, 2013 Does anyone make replacement control arm bolts? I need at least one for the 03 as the bolt that was in there got pretty beat up after multiple hits with a BFH... I am sure I could find a replacement Grade 8 bolt at the hardware store but I would prefer a factory replacement Quote Link to comment Share on other sites More sharing options...
AL Posted June 18, 2013 Author Report Share Posted June 18, 2013 Never mind, 5.18 each from the dealer Quote Link to comment Share on other sites More sharing options...
94 olds vert Posted June 18, 2013 Report Share Posted June 18, 2013 Should have used a BGFH. Quote Link to comment Share on other sites More sharing options...
AL Posted June 18, 2013 Author Report Share Posted June 18, 2013 The bolts are out, but they are far from usable, they were seized inside the bushing... later today im going to swap in the new cradle and get the engine sat back down on it Quote Link to comment Share on other sites More sharing options...
WhatTheFehl Posted June 19, 2013 Report Share Posted June 19, 2013 Chris used a sawzall on mine. Quote Link to comment Share on other sites More sharing options...
AL Posted June 19, 2013 Author Report Share Posted June 19, 2013 It would have taken me just as long probably, but the dealer gave me wholesale price so 7 bucks later, I have both sides coming... The drivers side one was fine but looked close to being stripped out and I really dont want to strip out the torx head Quote Link to comment Share on other sites More sharing options...
Crazy K Posted June 19, 2013 Report Share Posted June 19, 2013 remember to antiseize the threads in the hole! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.