67eleanorgt500 Posted June 15, 2013 Report Share Posted June 15, 2013 (edited) Ok, so today I was on my way to the Olds homecoming car show and out of the blue my turn signals quit working. I've replaced the rear turn signal bulbs in the taillights which didn't need to be replace because the filament was still intact, checked the fuses and no signs of a problem and front park/turn bulbs were fine too. My hazards do work though. When I signal I get no blinking light on the gauges, no sound nothing. Could my turn signal lever that has cruise, wiper mode have gone out? Any ideas or suggestions would be great. Edited June 15, 2013 by 67eleanorgt500 Quote Link to comment Share on other sites More sharing options...
RobertISaar Posted June 16, 2013 Report Share Posted June 16, 2013 like a 95% chance that the turn signal switch is to blame. have issues with brake lights too? need the stalk moved to certain positions to keep them acting normally? Quote Link to comment Share on other sites More sharing options...
67eleanorgt500 Posted June 16, 2013 Author Report Share Posted June 16, 2013 Thanks for your response. I just returned from the auto store and replaced the flasher fuse. That was to blame so my turn signals work now. Quote Link to comment Share on other sites More sharing options...
Schurkey Posted June 16, 2013 Report Share Posted June 16, 2013 Thanks for your response. I just returned from the auto store and replaced the flasher fuse. That was to blame so my turn signals work now. Replaced the flasher fuse...or the flasher itself? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.