Marcus18 Posted November 5, 2003 Report Posted November 5, 2003 Desired Finished Bore Size: 3.510 is factory so it should be the same right? Head Gasket Thickness: Ring Configuration: Valve Reliefs: Floater or press fit wrist pins: Wrist pin diameter: these things I know nothing about. anyone know? this is from the JE website marcus Quote
Robby1870 Posted November 5, 2003 Report Posted November 5, 2003 head gasket thickness is .060" Quote
SleeperRed90TGp Posted November 5, 2003 Report Posted November 5, 2003 Look around here p/n 02760. Pin is pressed in rod, slip fit in piston. Depends on the type of piton for finished bore size. Let them tell you what clerance to run. http://www.mahleinc.com/am_na/am_na.nsf/out/1.5.0.0?OpenDocument&6,447571E-02 Jud Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.