Mach 5 Posted June 7, 2012 Report Share Posted June 7, 2012 Im in deep pooper right meow really bad. Im planning on the Ohio trip but I dont think the Racer X TGP is going to make it. I had a trans leak which went unnoticed until last night right before the dyno pulls on my test drive I heard a whining from the trans. So I was looking the car over and found the my drain plug gasket had a hair line crack causing fluid to seep and ran the trans low. Now the differential bearings are noisy and I dont trust it to go on the 1500mile round trip journey to Ohio for this weekends meet. My question is does anyone know what the part number is for the differential bearings?? I found A-18 and a few other options but nothing set in stone. Also If possible from autozone since they are open late so I could do this over the next 2 days and keep me in gear to drive.. Thanks for yer help!! -Jarek Quote Link to comment Share on other sites More sharing options...
Mach 5 Posted June 7, 2012 Author Report Share Posted June 7, 2012 is it this??? http://www.autozone.com/autozone/parts/Timken-Transmission-Bearing/1990-Pontiac-Grand-Prix/_/N-igxyqZ6o26k?itemIdentifier=693085_81944_0_ Quote Link to comment Share on other sites More sharing options...
19Cutlass94 Posted June 7, 2012 Report Share Posted June 7, 2012 GM # 26046759 AC Delco # S1298 Those numbers are for the cup and cone. Tried calling but you didn't answer! haha Quote Link to comment Share on other sites More sharing options...
Penglii Posted June 7, 2012 Report Share Posted June 7, 2012 According to my GM parts book the 282 Differential Bearing is #9437733 I don't know anything else about it... but the part you linked to looks like the drawing of said bearing in my exploded diagram. Quote Link to comment Share on other sites More sharing options...
Mach 5 Posted June 7, 2012 Author Report Share Posted June 7, 2012 I just found another.. National A-18 is a Timkin Set-11 so whether thats correct or not idk.. Thanks for that number Penglii Im gonna cross reference that Quote Link to comment Share on other sites More sharing options...
Penglii Posted June 7, 2012 Report Share Posted June 7, 2012 You are welcome. Do you want a photograph of my 282 diagrams & parts number list while I have the pages handy? Quote Link to comment Share on other sites More sharing options...
Mach 5 Posted June 7, 2012 Author Report Share Posted June 7, 2012 ok just ref that!!! its a set 11!! going now as for link cross ref very good website: http://www.timken.com/en-us/products/Documents/Timken_Bearing_Cross_Reference_Guide.pdf Quote Link to comment Share on other sites More sharing options...
19Cutlass94 Posted June 7, 2012 Report Share Posted June 7, 2012 Is that an updated number? Cause I have an exploded view of a 282 and it gives me that GM #. Even though that crosses to a SET 11 as well.. Quote Link to comment Share on other sites More sharing options...
Penglii Posted June 7, 2012 Report Share Posted June 7, 2012 9437733 came from a 1990 Grand Prix parts book printed in September 1989... so that is probably an original, non-updated part number. Quote Link to comment Share on other sites More sharing options...
19Cutlass94 Posted June 7, 2012 Report Share Posted June 7, 2012 Oh gotcha. I have diagrams that were printed out this yr. Must just be difference in numbers/years. Quote Link to comment Share on other sites More sharing options...
Penglii Posted June 7, 2012 Report Share Posted June 7, 2012 Correct. Also the 1990 number specifies that it includes both the cup and the cone as a set. It gives no individual part numbers for those. Quote Link to comment Share on other sites More sharing options...
19Cutlass94 Posted June 7, 2012 Report Share Posted June 7, 2012 Yeah mine gives the number for the set and nothing individual. Quote Link to comment Share on other sites More sharing options...
Mach 5 Posted June 7, 2012 Author Report Share Posted June 7, 2012 Im such an idiot.. yaa know. considering I printed out those diagrams for you Jay at work you think that I would look at the book I printed for myself... NOOO of course not I panicked lmfao! thanks for everyones help. Im going to work now should have it apart tomorrow night I hope there is no other damage we shall see. If there is and I cant drive, Will and I are gonna be rockin the Alltrac Wagon sonnn!! haaalllllaaah Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.