99RegalGS Posted October 18, 2003 Report Posted October 18, 2003 I tried to make a board with some switches today to control the shifting of my transmission. I connected it to what I thought were the A and B shift solinoids and the converter lockup solinoid from looking at Brian89gp's webpage. It kinda works. I can't get it to stay in first. It shifts like normal into second then it stays in second. Then I flip on what I think is the B solinoid and it goes into 3rd. and when I flip on the A solinoid the torque converter locks up. The only thing the Torque Converter switch does is keeps the torque converter from locking up. what did I do wrong? Thanks Quote
brian89gp Posted October 18, 2003 Report Posted October 18, 2003 firstly, you have a 4t60e correct? You probably have the wiring hooked up wrong, just about every 4t60e is wired differently. I'll look for my book to check that. Quote
99RegalGS Posted October 18, 2003 Author Report Posted October 18, 2003 Yes it is a 4T60-E. Thanks Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.