1979lee Posted November 18, 2010 Report Share Posted November 18, 2010 Well after 169k miles i think its rebuild time for this 4t60e. ive put 95 k on this car with no real problems. the engine runs well ,still on the factory original lim's. anyhow. shes slipping in 4th gear(overdrive) and today a little in first gear. if i give her a little shit the slippin' goes away(more throttle= more line pressure me thinks). its shifts through the gears fine and it stays in gear fine, reverse is instant. but when shifting into drive its about 3/4 of a second delayed. a little history on this trans,car. the prior owner was the county of san bernardino california (deserts, mountains hot temps, hills, and by the way the cars undercarrage looks it went offroad a few times. i got it in 2006 for $ 3500 (yeah i paid too much) it had 75k on it then. the county must haced servied the tranny at 50k or so (it had a FILTRAN filter) but it ran great and shifted perfect till about 2 months ago. i had noticed something odd about the shifting , it just didnt feel right. so i dropped the pan did a fluid/filter change(dex 3). now here it is a month later and its slipping and the fluid is darker and it smells burned. so ok then i suck out enough too add some lucas trans stuff. (it didnt help made it worse). last night i pumped most of that crap out and put in 5 new qts of dex 6. it was better for about a day now it slips again now in 1st. Sorryfor the long winded(gasbag) post. any ides or Prayers? for this 60e oh by the way no check engine light is on and no codes in the comp lee Quote Link to comment Share on other sites More sharing options...
AL Posted November 18, 2010 Report Share Posted November 18, 2010 I would call around to a few junkyards and see if they have a low mile trans for you Quote Link to comment Share on other sites More sharing options...
1979lee Posted November 18, 2010 Author Report Share Posted November 18, 2010 I would call around to a few junkyards and see if they have a low mile trans for you yeah iam going to have to do that. ive never changed a transaxle before. Quote Link to comment Share on other sites More sharing options...
BXX Posted November 18, 2010 Report Share Posted November 18, 2010 Where are you located??? Im in Lorain, Ohio I have a rebuilt 4t60e sitting in my garage collecting dust. Quote Link to comment Share on other sites More sharing options...
AL Posted November 18, 2010 Report Share Posted November 18, 2010 With what gearing BXX Quote Link to comment Share on other sites More sharing options...
xtremerevolution Posted November 18, 2010 Report Share Posted November 18, 2010 Your clutch plates are fried buddy. That's the burning oil smell. That trans needs a rebuild, its really that simple. Quote Link to comment Share on other sites More sharing options...
1979lee Posted November 19, 2010 Author Report Share Posted November 19, 2010 Where are you located??? Im in Lorain, Ohio I have a rebuilt 4t60e sitting in my garage collecting dust. Iam In Southern Califoria Quote Link to comment Share on other sites More sharing options...
1979lee Posted November 19, 2010 Author Report Share Posted November 19, 2010 Where are you located??? Im in Lorain, Ohio I have a rebuilt 4t60e sitting in my garage collecting dust. Iam In Southern Califoria Quote Link to comment Share on other sites More sharing options...
AL Posted November 19, 2010 Report Share Posted November 19, 2010 Just a few blocks away lol Quote Link to comment Share on other sites More sharing options...
thikstik Posted January 1, 2011 Report Share Posted January 1, 2011 [Definately R/R time i hate to say. It only takes a couple of seconds to fry a clutch pack during a soft shift/slip. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.