Anyone ever used the 114.3 bolt pattern for wheels?

[supertrick_05]

I know a lot of guys used the 114.3 bolt pattern on the 2nd gen W-Bodies, but not sure about the 1st gens. Anyone use them? If so, any problems?

[jeremy]

Most people use that pattern as it is much more common then the 5x115.

[kuntzie]

yes there is like no difference in between these sizes, (.7mm across 0r .35mm difference on each side of the lugnut)

[kaptnjack]

I run them on mine with no problems.

 

BUT...you have to make sure you get them centered properly by tightening in small increments in a star pattern.

 

I oncw had a shop remove and replace a wheel and they tightened one lug before the others causing them to off=center and it rode bumpy to say the least.

 

properly tightened mine are perfectly smooth at any speed.

[Garrett Powered]

I tried them on two different cars and one was bumpy and one was fine.

 

but I used the tightening method the same way and it wouldn't help on the one car. both were gp's.