crazyd Posted July 15, 2009 Report Share Posted July 15, 2009 Hey all, I pulled the 3100 apart to change head gaskets on it and now that I've put it all back together, I can't find the last connector to the ICM. It's the smaller one of the two on the right side, three pins. Could someone take a look at theirs and trace where it comes from so I've got an idea where to look for it? Quote Link to comment Share on other sites More sharing options...
95 vert Posted July 16, 2009 Report Share Posted July 16, 2009 Crank sensor? Runs up from the rear left of the block. Quote Link to comment Share on other sites More sharing options...
Crazy K Posted July 16, 2009 Report Share Posted July 16, 2009 sounds like it. is is a 3 wire connector with 2 wires in it, purple and yellow and the are twisted to reduce radio interference. Quote Link to comment Share on other sites More sharing options...
Brian P Posted July 16, 2009 Report Share Posted July 16, 2009 Yeah, maybe it fell back towards the rear of the block. It's gotta be hanging around there somewhere... Quote Link to comment Share on other sites More sharing options...
crazyd Posted July 17, 2009 Author Report Share Posted July 17, 2009 I thought the crank sensor was short and attached down below the compressor. Oh wait... this is the one that goes thru the side of the block? Yeah, I know where to look for it now. Thanks guys. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.