ltlfrari Posted September 7, 2003 Report Share Posted September 7, 2003 I am putting a 3.4 DOHC from a 95 olds cutlass supreme into a Fiero as it seemed like a good idea when I started! I am trying to figure out the waterworks but I have no idea what the water pump connecter, circled in the pic below, goes to on the original car. Can anyone help pleezze ? PS is the water comming out of this nozzle or going in ? In this pic I assume this goes to the heater core. Is that correct. Thanks all Dave E http://www.ltlfrari.com Quote Link to comment Share on other sites More sharing options...
4spdz34 Posted September 7, 2003 Report Share Posted September 7, 2003 the pipe that goes to that, goes all the way around the back of the engine and i belive it goes to the heater core also Quote Link to comment Share on other sites More sharing options...
brian89gp Posted September 7, 2003 Report Share Posted September 7, 2003 First pic is the return from the heater core, the second pic is the feed to the heater. If you havn't already, you might check out the following, there are a few who have done the DOHC swap over there. http://www.fiero.nl/cgi-bin/fiero/Ultimate.cgi?action=intro&BypassCookie=true Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.