White93z34 Posted June 11, 2009 Report Posted June 11, 2009 (edited) Someone suggested we have a Thread dedicated to parts numbers, And that is an excellent Idea. I'm going to keep this open and you can post whatever you feel is helpful to the community. I will be deleting the replys after I paste them into this Post to keep it uncluttered. Unless noted these are Manufacturer Part numbers and will be the same regardless of who you buy from Brakes: Power Master III Parts: 88927271 / 18M874 - accumulator 88927270 - pressure switch SIA Electronics - Call for pricing and parts (800) 737-0915 Goodridge SS brake lines: '88-'90 W - GS12264 '94-'97 W - GS12237 Suspension: GMPP rear trailing arms - 12498649 Police Package Impala trailing arms- 15856683 - QTY2 Hub to knuckle bolts(1 and 1.5 gen front only) - 10104548 KYB GR2/Excel G Front Sturts - 366004 KYB GR2/Excel G Rear Struts - 236003 Energy Suspension greasable poly sway bar bushings (when using 34mm front sway bar) - 9.5160G and 9.5167G Rear sway bar bracket - 10259660 Engine: Oil Filters: 2.8/3.1/3x00/3800 - PF47 3.4 - PF52 Note: You can use the PF52 on just about anything that calls for a PF47. Knock Sensor (genII 60*)- 10456208 Crank Position Sensor (CPS) (GenII 60*) - 10456555 oil/distributor drive O-Ring - 10477565 Oil plug bolt thread size - M12-1.75 Oil drain plug - 10017615 aftermarket Magnetic plug - Motormite "Oil-tite!" 65372 Dorman Quick Disconnect 800-401 - Cooling System Connector that screws into the LIM of 3.1mpfi, earlier 3100sfi, earlier 3400sfi, and 3.4DOHC cars. 3.4 DOHC Timing Belt Parts: 24502982 - Belt 24503561 - Tensioner Pulley 10162013 - Tensioner Pulley Bolt 24503859 - Idler Pulley, 2 needed 24503860 - Tensioner Actuator 24503861 - Tensioner Actuator mounting plate. 89017825 - Improved aluminum Series II 3800 intake gaskets 2.8/3.1 Throttle Body gasket - Fel-pro 60728 91-97 LQ1 Solid rubber engine mount - DEA/Pioneer P/N - A2555 (Available from Autozone) 88-93 2.8/3.1 Solid rubber engine mount - DEA/Pioneer P/N - A2660 (Available from Autozone) 94-96 3100 Solid rubber engine mount - DEA/Pioneer P/N - A2796 (Available from Autozone) 97-04 W-Body Solid rubber engine mount(EXCEPT 3.5L Intrigue) - DEA/Pioneer P/N - A2796 (Available from Autozone) 2.8/3.1 Oil Pressure Sending Unit w/ Gauge (Seems to be for any 60 degree W from 89-90): GM part number 10201491. Transmission: 4T60-E VSS - 10456034 4T60-E Parking Brake Actuator - 24213560 Getrag 284 Spec Stage II Clutch - SC272 Output Shaft Seals Timken P/N - 2003N 284 select cable - 10192248 284 Slave Cylinder - 12550806 282/284 Clutch pedal bushing - 14091384 Interior: GM W-body Door Key "C": 12390306 GM W-body Ingition Key "D": 26002688 GM W-body Ignition key "E": 26024974 Body/Misc: 97-00 - Regal GS and Grand Prix GTP fuel pump resistor - 88951182 1st gen Hood release cable - 10167401 94-96 GP Fender flare Clips - 10229345 Power steering rack pressure switch - 10238816 Subframe Bushings 14088025 - QTY2 14088026 - QTY2 14088027 - QTY2 14088028 - QTY2 Subframe Bolts 10220561 - QTY4 Subframe Retainers 10139080 - QTY2 10203413 - QTY2 Fuel Tank Lines for 88-91 W bodys 10062887 PIPE ASM FUEL RTN 10062888 PIPE ASM FUEL FEED AC Accumulator: 4 Season's PN# 33206 - VERY useful for 284 cars and Turbo Grand Prix Edited April 13, 2011 by White93z34 Quote
mfewtrail Posted September 26, 2009 Report Posted September 26, 2009 (edited) 1st Gen GP parts catalog scans: Use the option to download the image and you'll be able to view them full size and also zoom in so you can clearly view all part numbers. Edited December 9, 2020 by mfewtrail invalid link 90sEraWhips 1 Quote
GutlessSupreme Posted September 27, 2009 Report Posted September 27, 2009 I have the GP sedan parts catalog pages finally that I have been meaning to scan and post up as well. The GP coupe pages cover a lot but for the few body components that are different, the sedan pages should be a nice addition Quote
Crazy K Posted January 19, 2010 Report Posted January 19, 2010 Injector O-rings: multitech 1 BWD 274573 (formerly GP Sorensen 800-9220) brown silicone *kit contains 12 o-rings, not 8 as sometimes listed *half the kit will do the top half of multitech 2 injectors. (carried by Advance autoparts) *** BWD 274572 contains 8 rings... buy two and it can be cheaper than buying the 12 box mutlitech 2 ACD# 217-1427 GM#12570621 Quote
Dark Ride Posted March 1, 2010 Report Posted March 1, 2010 Poly Dogbone bushings, these require drilling: Energy Suspension: 3-7103 R R is for Red, you can get them in black is well which is G These are torque arm bushings for a fiero Quote
jimmyfloyd Posted June 28, 2010 Report Posted June 28, 2010 94/95 GP Driver Information Center: 16149822 068000-7111 96 GP Driver Info Center (DIC): 16203912 068000-7120 Quote
Crazy K Posted July 19, 2010 Report Posted July 19, 2010 viable source of rear trailing arms? http://gmperformancepartszone.com/tubular-rear-trailing-p-6494.html?cPath=8_188_191 Quote
ruktosk Posted July 23, 2010 Report Posted July 23, 2010 Intake Vacuum 'T' Connector - GM Part # 24502852 Quote
Crazy K Posted December 5, 2010 Report Posted December 5, 2010 (edited) Dorman - OE Solutions Suspension Trailing Arm Part No: 905-501 SQUARE TUBE - CHEAPEST AT ADVANCE AUTO PARTS! looks just like OEM arm used on impala SS... P.S. NOW CARRIED BY ROCKAUTO FOR CHEAPER!!!!! Edited May 6, 2011 by Crazy K Quote
Crazy K Posted May 6, 2011 Report Posted May 6, 2011 (edited) MOOG suspension bushings for GEN 1/1.5 sway bars (blue rubber? ones) (34mm bar) inner: MOOG Part # K6457 {Sway Bar Bushing Kit} Front Suspension; To Frame; w/1-5/16" Bar (all bars) outer: MOOG Part # K6641 {Sway Bar Bushing Kit} Front Suspension; To Control Arm Edited June 29, 2012 by Crazy K Quote
WhatTheFehl Posted June 7, 2011 Report Posted June 7, 2011 Door panel retainer clips: Auveco Part #: AP16695 Quote
Crazy K Posted July 29, 2011 Report Posted July 29, 2011 gen 1/1.5 Energy Suspension polyurethane front control arm bushings (requires modification to fit) 3.3171R or 3.3171G as seen: http://www.amazon.com/gp/product/B001664MSI/ref=ox_sc_sfl_title_1?ie=UTF8&m=ATVPDKIKX0DER http://www.amazon.com/Energy-Suspension-3-3171R-Control-Bushing/dp/B000CGZ0NO/ref=sr_1_7?s=automotive&ie=UTF8&qid=1311957174&sr=1-7 http://www.summitracing.com/parts/ENS-3-3171R/ http://www.summitracing.com/parts/ENS-3-3171G/ Quote
Penglii Posted March 24, 2012 Report Posted March 24, 2012 I just tried to order a new vac spider #10114903 for my TGP from gmpartsdirect.com and the order was cancelled because the part is no longer available. Figured that might be good info to get out there. These vac spiders are becoming harder to get. Quote
Crazy K Posted June 29, 2012 Report Posted June 29, 2012 Something that is very recommended when doing deep engine work is to use revised problem solving intake gaskets so you don't have the risk of having to do the job twice, or worse. here they are: 3800 gasket sets:FEL-PRO Part # MS98014T PermaDryPlus®; Intake Manifold Gasket SetFEL-PRO Part # VS50465R PermaDry® Valve Cover Gasket*head gaskets and upper intake gaskets may vary by application in normally aspirated verses forced induction* 3x00Metal Intake Manifold Gaskets FEL-PRO Part # MS98004T PermaDryPlus®; with upper gaskets and seals. for SMALL port intake, L82 (Vin M)Metal Intake Manifold Gaskets FEL-PRO Part # MS98003T PermaDryPlus®; with upper gaskets and seals. for LARGE port intake, LG8 3100 (Vin J), LA1 3400 (Vin E) Quote
AL Posted July 19, 2012 Report Posted July 19, 2012 I just found this site that has pretty much every part number you could ever want http://gmoem.com/ Hope that can help someone Quote
Crazy K Posted August 21, 2012 Report Posted August 21, 2012 http://www.w-body.com/showthread.php/75068-dorman-3800-metal-coolant-elbows-now-availible Which shows an aluminum 3800 coolant elbow: http://www.dormanproducts.com/mobile/p-52351-47065hp.aspx?year=1997&make=BUICK part number 47065hp Quote
Galaxie500XL Posted May 10, 2013 Report Posted May 10, 2013 LQ1 Cam gear bolt (94-up...maybe 91-93?) These are the 4 bolts that secure the cam gears to the cams. GM P/N 10127521 Quote
GnatGoSplat Posted July 10, 2013 Report Posted July 10, 2013 (edited) Coolant Pipe. Original Thread Here: http://www.w-body.com/showthread.php/77468-repairing-ruptured-coolant-pipe The original part is GM # 10145142. There's an aftermarket Dorman replacement, #626-100. They run about $30 shipped on eBay. http://www.ebay.com/itm/DORMAN-626-100-Heater-Hose-/390597626865?pt=Motors_Car_Truck_Parts_Accessories&hash=item5af16ecbf1&vxp=mtr A rubber hose might last longer, but the OEM style part should also last at least a decade. Edited July 10, 2013 by runt Quote
viperrexblu Posted October 21, 2014 Report Posted October 21, 2014 Someone suggested we have a Thread dedicated to parts numbers, And that is an excellent Idea. I'm going to keep this open and you can post whatever you feel is helpful to the community. I will be deleting the replys after I paste them into this Post to keep it uncluttered. Unless noted these are Manufacturer Part numbers and will be the same regardless of who you buy from Brakes: Power Master III Parts: 88927271 / 18M874 - accumulator 88927270 - pressure switch SIA Electronics - Call for pricing and parts (800) 737-0915 Goodridge SS brake lines: '88-'90 W - GS12264 '94-'97 W - GS12237 Suspension: GMPP rear trailing arms - 12498649 <- On indefinite national backorder Police Package Impala trailing arms- 15856683 - QTY2 Hub to knuckle bolts(1 and 1.5 gen front only) - 10104548 KYB GR2/Excel G Front Sturts - 366004 KYB GR2/Excel G Rear Struts - 236003 Energy Suspension greasable poly sway bar bushings (when using 34mm front sway bar) - 9.5160G and 9.5167G Rear sway bar bracket - 10259660 Engine: Oil Filters: 2.8/3.1/3x00/3800 - PF47 3.4 - PF52 Note: You can use the PF52 on just about anything that calls for a PF47. Knock Sensor (genII 60*)- 10456208 Crank Position Sensor (CPS) (GenII 60*) - 10456555 oil/distributor drive O-Ring - 10477565 Oil plug bolt thread size - M12-1.75 Oil drain plug - 10017615 aftermarket Magnetic plug - Motormite "Oil-tite!" 65372 Dorman Quick Disconnect 800-401 - Cooling System Connector that screws into the LIM of 3.1mpfi, earlier 3100sfi, earlier 3400sfi, and 3.4DOHC cars. 3.4 DOHC Timing Belt Parts: 24502982 - Belt 24503561 - Tensioner Pulley 10162013 - Tensioner Pulley Bolt 24503859 - Idler Pulley, 2 needed 24503860 - Tensioner Actuator 24503861 - Tensioner Actuator mounting plate. 89017825 - Improved aluminum Series II 3800 intake gaskets 2.8/3.1 Throttle Body gasket - Fel-pro 60728 91-97 LQ1 Solid rubber engine mount - DEA/Pioneer P/N - A2555 (Available from Autozone) 88-93 2.8/3.1 Solid rubber engine mount - DEA/Pioneer P/N - A2660 (Available from Autozone) 94-96 3100 Solid rubber engine mount - DEA/Pioneer P/N - A2796 (Available from Autozone) 97-04 W-Body Solid rubber engine mount(EXCEPT 3.5L Intrigue) - DEA/Pioneer P/N - A2796 (Available from Autozone) 2.8/3.1 Oil Pressure Sending Unit w/ Gauge (Seems to be for any 60 degree W from 89-90): GM part number 10201491. Transmission: 4T60-E VSS - 10456034 4T60-E Parking Brake Actuator - 24213560 Getrag 284 Spec Stage II Clutch - SC272 Output Shaft Seals Timken P/N - 2003N 284 select cable - 10192248 284 Slave Cylinder - 12550806 282/284 Clutch pedal bushing - 14091384 Interior: GM W-body Door Key "C": 12390306 GM W-body Ingition Key "D": 26002688 GM W-body Ignition key "E": 26024974 Body/Misc: 97-00 - Regal GS and Grand Prix GTP fuel pump resistor - 88951182 1st gen Hood release cable - 10167401 94-96 GP Fender flare Clips - 10229345 Power steering rack pressure switch - 10238816 Subframe Bushings 14088025 - QTY2 14088026 - QTY2 14088027 - QTY2 14088028 - QTY2 Subframe Bolts 10220561 - QTY4 Subframe Retainers 10139080 - QTY2 10203413 - QTY2 Fuel Tank Lines for 88-91 W bodys 10062887 PIPE ASM FUEL RTN 10062888 PIPE ASM FUEL FEED AC Accumulator: 4 Season's PN# 33206 - VERY useful for 284 cars and Turbo Grand Prix I AM LOOKING FOR GM PART #24503861 DO YOU KNOW WHERE I CAN GET THIS. I KNOW THAT IT IS DISCONTINUED. Quote
AL Posted October 21, 2014 Report Posted October 21, 2014 Says they have 1 in stock: http://oemcats.com/oem-parts/24503861.html Quote
RobertISaar Posted February 9, 2015 Report Posted February 9, 2015 for the most well done(crustiest) of w-bodies: having to replace all of the fittings due to running new brake lines from front to rear, it appears that all of the line nuts in the braking system of the 95 monte carlo uses a M10-1.0 thread with the exception of 2 of the master cylinder line nuts, those appear to be M11-1.5. I imagine this applies to at least all w-bodies with ABS VI, but the non-ABS cars are probably similar/identical. can't speak for PM3. Quote
94CutlassXtreme Posted June 23, 2015 Report Posted June 23, 2015 - Dorman trailing arm replacements (square tube, not U-channel like the stockers) p/n 905-501 (pair) - Dorman trailing arm brackets to frame (these usually rot out) p/n 523-023 (97-up) - Dorman front sway bar (33mm diameter) p/n 927-100 (97-up) - Dorman rear sway bar (16mm diameter) p/n 927-110 (97-up) - Moog "problem solver" front end links (urethane bushings, barrel nut, extra thick center section) p/n K700527 (97-up) Quote
Crazy K Posted December 2, 2015 Report Posted December 2, 2015 Differential Lube Tube Retainer Kit:sonnax 84532-01K 4t60e/4t65e add this to prevent the differential lube line from seperating from the accumulator, which results in transmission failure. It locks the lube line and the line adjacent to together. Quote
jiggity76 Posted December 18, 2019 Report Posted December 18, 2019 (edited) I'm going to attempt to start this up again. Illuminated door lock for the coupes. Part #16608789. Edited December 18, 2019 by jiggity76 Quote
jiggity76 Posted December 18, 2019 Report Posted December 18, 2019 CS AQ9 seat controls (International Series). Part #20678173. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.