AWeb80 Posted March 3, 2009 Author Report Posted March 3, 2009 Mike.....here are some pics and a vid of the Mach 1 http://www.w-body.com/forum/index.php?topic=62616.0 http://smg.photobucket.com/albums/v639/AWeb/Dads%20Mach%201/?action=view¤t=101_1641.flv Quote
blackbombshell95 Posted March 3, 2009 Report Posted March 3, 2009 Props for doing your own rebuild. What aftermarket parts have you got planned? If you haven't already contact dave @ tripleedgeperformance for stronger 4t60e parts. Defiantly get a transgo shift kit if you haven't already. Best of luck with the rebuild. Quote
AWeb80 Posted March 3, 2009 Author Report Posted March 3, 2009 NO parts yet just going to pull it apart and figure out what I need from there. Quote
SigEpCutlass Posted March 3, 2009 Report Posted March 3, 2009 Mike.....here are some pics and a vid of the Mach 1 http://www.w-body.com/forum/index.php?topic=62616.0 http://smg.photobucket.com/albums/v639/AWeb/Dads%20Mach%201/?action=view¤t=101_1641.flv Thanks Adam. That Mach 1 is sweet! G/L on the rebuild! Quote
Euro Posted March 3, 2009 Report Posted March 3, 2009 ahhh curb rash!!!! haha j/k. That looks like fun! I can't wait until you pull it apart, I've never seen the internals of one of our trans'. Quote
meltboy1 Posted March 3, 2009 Report Posted March 3, 2009 man, I sure wish I had a nice big garage like you instead of having to do mine in the driveway in the middle of winter... another pair of hands would have been nice too, looks like you are off to a good start good luck with the rest of it, shit does tend to break, I busted a ball joint too... lol Quote
Brian P Posted March 3, 2009 Report Posted March 3, 2009 I can't remember if I took pics of my trans when I stripped it and rebuilt (with help of a friend). The worst part of it all was the fact that reverse was non-existent after I installed it FML. Quote
Brian P Posted March 3, 2009 Report Posted March 3, 2009 That's still under investigation . It's likely a defect in the channel plate gasket (blocking a passageway) or a check ball out of place. I have to dig into it one day. Quote
carkhz316 Posted March 4, 2009 Report Posted March 4, 2009 Low/Reverse Clutch Pack, and/or " " " Overrun Clutch Quote
Brian P Posted March 4, 2009 Report Posted March 4, 2009 The clutch was good upon reassembly, but I won't discount the idea that it may be installed wrong. Keep in mind all forward gears worked. Quote
Crazy K Posted March 4, 2009 Report Posted March 4, 2009 The clutch was good upon reassembly, but I won't discount the idea that it may be installed wrong. Keep in mind all forward gears worked. is the tranny still in your car???? Quote
Brian P Posted March 4, 2009 Report Posted March 4, 2009 The clutch was good upon reassembly, but I won't discount the idea that it may be installed wrong. Keep in mind all forward gears worked. is the tranny still in your car???? no!!!!! I have an interim '96 Lumina tranny in there for the last 40k miles. Quote
carkhz316 Posted March 4, 2009 Report Posted March 4, 2009 The clutch was good upon reassembly, but I won't discount the idea that it may be installed wrong. Keep in mind all forward gears worked. hmm, well the two I mentioned are only needed/ used in Reverse and Manual 1st Quote
Brian P Posted March 4, 2009 Report Posted March 4, 2009 I'll let you know (in a separate thread or PM) what I find, once I disassemble the tranny. My free time has been limited to house work lately Quote
AWeb80 Posted March 4, 2009 Author Report Posted March 4, 2009 House Work? That's for women :ohnoes: Quote
Brian P Posted March 4, 2009 Report Posted March 4, 2009 House Work? That's for women :ohnoes: Not dishes!!! I gutted my father's "finished" basement and water-sealed the foundation. Italian electricians DO NOT KNOW HOW to finish a basement, let me tell ya. Quote
old442man Posted March 4, 2009 Report Posted March 4, 2009 I just want to know what the duct tape was doing anywhere near your car. I can see myself using for something on mine in a pinch but yours is so purdy! Quote
AWeb80 Posted March 4, 2009 Author Report Posted March 4, 2009 Taping Bolts Together To Label....Mask Off Holes To The AC Lines....Etc Quote
old442man Posted March 4, 2009 Report Posted March 4, 2009 Whew. I just use sandwich bags with the white stripe to write on. Quote
meltboy1 Posted March 4, 2009 Report Posted March 4, 2009 nah screw that, guessing is more fun... lol j/k, I use bags too Quote
slick Posted March 4, 2009 Report Posted March 4, 2009 I've never marked bolts. I just put the bolts with the correct components that are removed. Or in a pile. Just depends how I feel. Quote
95aquase Posted March 5, 2009 Report Posted March 5, 2009 never marked bolts either. throw it all into a pile and put back together. Quote
Night Fury Posted March 5, 2009 Report Posted March 5, 2009 I haven't ever marked bolts either, but regret it every time. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.