mattlgiberson Posted December 2, 2008 Report Posted December 2, 2008 Just a quick question...will the seats from a 4 door Cutlass bolt into the 2 door? The leather on my seats is starting to go so I want to replace them. Thanks Quote
jake91 Posted December 2, 2008 Report Posted December 2, 2008 there have been a few threads on this and i believe the answer was no Quote
Brian P Posted December 2, 2008 Report Posted December 2, 2008 you could always just swap the cushions/skins! Quote
GP1138 Posted December 3, 2008 Report Posted December 3, 2008 What? The seats will bolt in just fine, the problem is that they won't fold down like the 2-door seats will. But they will bolt in. Any '88-'96 W seat will fit in any '88-'96 W-Body. I'm 99% sure of that. Quote
95 vert Posted December 3, 2008 Report Posted December 3, 2008 Like Brian said, swap the covers/cushions. It's actually pretty simple to do. The backs can be done with the seat still in the car and takes about 20 minutes. Quote
mattlgiberson Posted December 3, 2008 Author Report Posted December 3, 2008 Thanks guys...and it was kind of a "duh" after thought that the 4 door seats would fold fair enough Quote
Brian P Posted December 3, 2008 Report Posted December 3, 2008 ya that's what I assumed the issue was (no folding capability = no rear passengers) Quote
89SupremeCutty Posted December 3, 2008 Report Posted December 3, 2008 i had a friend who put the front seats from his 4 door '93 cutlass ciera into his 2 door '88 celebrety. being as both are a bodies i beleive, i don't see why the seats from a 2 door w can't go into a 4 door w. Quote
Venom Posted December 5, 2008 Report Posted December 5, 2008 The seats in my CS are from a 4 door. The bottom seat cushion did not fit well at all so I eventually took the rears back out and Im currently looking for a rear bucket setup. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.