88-96 Headers for L67 swaps

[wickedbuick]

I know I can get SLPs or TOGS ect. and cut the firewall. I am looking for something that works with no mods. Pure bolt on. Has anyone had some custom bent and turn out good? If so, who did the work? I know almost any race shop should be able to do it , but I am wondering if anyone has gone that route. I need some BAD and was hoping to get some good info on custom ones.

 

Thanks,

Deia

[Euro]

Pacesetters are the only ones that will bolt in from what I hear.

[dbtk2]

Pacesetters are the only ones that will bolt in from what I hear.

 

I have never heard of anyone with a swapped car running pacesetters before, and from my experience with pacesetters and my experience with swapped cars, I really don't see how they would even be close. TOG's would fit much closer it seems. I know fathead had a set custom made for his car that fit with no firewall modifications, but not sure about anyone else.

[Euro]

I can't remember who I heard that from, but my friend is about 95% complete with his l67 swap and he heard from...I think Fatty that Pacesetters will work.

[digitaloutsider]

I'd be a little surprised if Pacesetters fit in a first gen. They take up a LOT of room in the second gens and come very close to the firewall as well.

[terryk2003]

I'd be a little surprised if Pacesetters fit in a first gen. They take up a LOT of room in the second gens and come very close to the firewall as well.

 

for sure...in fact, mine hit the bottom of the firewall...GHEY!!...can't wait to get them off!

[Euro]

The rear header might be a pain for my buddy's car but the front looks like it'll fit fine.