SnowDrift Posted May 21, 2008 Report Share Posted May 21, 2008 What is the torque supposed to be on these two bolts for the by-pass at the water pump on a '93 3.1 v-6? Quote Link to comment Share on other sites More sharing options...
J Posted May 21, 2008 Report Share Posted May 21, 2008 Use German specs. guten tight. When i did mine i snugged them down and it's been find for over 4 years Quote Link to comment Share on other sites More sharing options...
GutlessSupreme Posted May 21, 2008 Report Share Posted May 21, 2008 exactly. the rating is probably in in-lbs, I wouldn't worry about it. just don't crank em down and snap them. Quote Link to comment Share on other sites More sharing options...
mfewtrail Posted May 22, 2008 Report Share Posted May 22, 2008 Tighten them down with a 1/4'' ratchet. They don't need to be extremely tight or you will end up breaking them(speaking from experience! ). Quote Link to comment Share on other sites More sharing options...
Brian P Posted May 22, 2008 Report Share Posted May 22, 2008 89 in/lb Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.