Jump to content

New FWI, now 3" and with pics!!!


BXX

Recommended Posts

Well, I decided my 2.5" FWI was better than stock, but felt like it was falling off about 5000rpm. So, I bought some parts and fabbed a 3" FWI today. Definately a difference, especially on the top end to the 6000rpm WOT shift.

 

I really need to relocate the battery for more reasons than the FWI (underhood heat is an issue) so I will be ordering a relocation kit from Summit soon. Yes, I know the battery is ghetto rigged right now. :lol:

 

Now on to the pics!!

 

P1010331.jpg

 

P1010333.jpg

 

P1010339.jpg

 

P1010332.jpg

 

P1010335.jpg

 

P1010334.jpg

 

The cost of everything was pretty cheap. Once the battery gets relocated, I can adjust the pipe a bit to straighten it out.

 

Pipe - $15 eBay

Extra Coupler - $8 AutoZone

Cone Filter - $25 AutoZone

Relocation Kit - $80 Summit (not yet purchased)

----------------------------------------------------------------------

$48 for Intake, $128 with battery relocation

 

Link to comment
Share on other sites

6000RPM WOT shift?

 

 

Mine shifts 5500 WOT.

 

 

Mine shifts at 6000rpm, and pretty snappy at that. I know the transmission is a GM Goodwrench tranny, so who knows whats up with it...

 

 

 

nice, clean your engine bay for chrissakes

 

Why??? Its a old crappy 161K engine bay... it'll be clean once I paint the car or I decide to rip the engine out for a rebuild..

Link to comment
Share on other sites

nice, clean your engine bay for chrissakes

 

Why??? Its a old crappy 161K engine bay... it'll be clean once I paint the car or I decide to rip the engine out for a rebuild..

 

Because it's disgusting. :puke:

Link to comment
Share on other sites

But it doesn't have to be clean to work. Or even work better. My engine bay isn't spotless. And never will be, mostly because I'm the only one who looks at it, and it doesn't bother me.

Link to comment
Share on other sites

LOL yeah, theres no way in hell Im ever going to clean my engine bay other then fixing the occasional leak. But if I ever do an engine swap then I would give it a good cleaning.

 

BTW, what are you doing with the old intake?

Link to comment
Share on other sites

LOL yeah, theres no way in hell Im ever going to clean my engine bay other then fixing the occasional leak. But if I ever do an engine swap then I would give it a good cleaning.

 

BTW, what are you doing with the old intake?

 

The filter was junk on it, and from where the pipe was kinda rubbing the fenderwell since I never secured it, it started to rub through... If you want it, you can have it. Just throw some tape or epoxy where it was rubbing. It'll just be the pipe and 1 coupler. You will still need a 3" coupler from like AutoZone and a cheapo air filter.

 

If you want, I can make you one for $60... Take into account you will need to either bungy down the battery or relocate it. Either way, the 3" is definately a big difference all around.

 

Well also clean engine parts dissipate heat better than dirty ones. ;)

 

My engine doesnt get anywhere close to overheating, so dirt/grime isnt an issue.

Link to comment
Share on other sites

Well since I already own a battery tray and holddown sitting in my garage, I decided against a relocation kit since I just won this on ebay

 

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1&item=140221160146&ssPageName=STRK:MEWN:IT&ih=004

 

Better than paying $80 for a 2ga kit.. The 1/0 will be bigger and better. It'll only cost me like $5 for 2 universal side post terminals and about another $5 for some terminals.

 

$48 is > $80 any day :lol:

Link to comment
Share on other sites

Yeah Ill just take the old one off of you if you dont mind. I already got the filter and can pick up a coupler the next time Im at the zone. Just stop by the next time youre in town.

 

BTW, Nice score on the wire.

Link to comment
Share on other sites

don't take your car to any track. it will definitely not pass inspection with a bungy cord as a battery tie down.

 

The tracks around here don't even inspect. If you look stock like he does they'll just let you in.

Link to comment
Share on other sites

The tracks around here don't even inspect. If you look stock like he does they'll just let you in.

 

Same, the only thing they check on me is that im wearing pants (:dunno:) and I have a helmet.

Link to comment
Share on other sites

don't take your car to any track. it will definitely not pass inspection with a bungy cord as a battery tie down.

 

hence i am relocating the battery like i have already described :wink:

Link to comment
Share on other sites

don't take your car to any track. it will definitely not pass inspection with a bungy cord as a battery tie down.

 

hence i am relocating the battery like i have already described :wink:

:lol: that FWI looks good though. :high5:
Link to comment
Share on other sites

How much to make 2 of them? Maybe trade for Ipod video? 30gb

 

 

I can do $175 shipped for both... And if math isnt your best skill, that is $87.50 each :lol:

 

Ummm, an Ipod is almost worthless to me.. WTF am I supposed to do with it :lol: I already have a SanDisk Sansa e260 and its more storage space than I need.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...