sonick Posted March 24, 2008 Report Share Posted March 24, 2008 Okay, I've had a pair of cheap aftermarket 6x9's in my rear deck for the longest time in my '90 GP, but its been wired the wrong way all this time, and I think thats what's causing the protection circuit in my HU to kick in at higher volumes. Basically, I want to find one of the pair of wires that lead to the rear 6x9's, and splice it with the HU rather than running a new pair of wires back there. I just wanted to know what it was before I start hacking and splicing into the factory harness. I have read, and searched, and read and searched to no avail. All I know is, the wires going from the HU go to the factory amp, which splits the signal into a high and low, which then goes to either voice coil of the stock Delcos. There were also configs which the split was at a crossover after the amp, but I don't think thats the config in my car. Thanks Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.