stockgp Posted September 1, 2007 Report Share Posted September 1, 2007 anyone have any other ideas where i can get a new hydraulic line that connects the clutch master and slave cylinders? i went to the dealer and they said i have to buy the master, line, and slave as an assembly. i'm thinking about taking the fittings off of the factory line and just going to get some hydraulic line to make my own. does anyone have any idea how much pressure the line should be able to hold if i go that route? Quote Link to comment Share on other sites More sharing options...
Pabz Posted September 1, 2007 Report Share Posted September 1, 2007 250 - 500 psi I used 500 psi hose. Used the original fittings and got it crimped See here other options are ss hose with 3AN ends to these couplers. http://carshop.carshopinc.com/product_info.php/products_id/88965/C/S2359 or these jeep ones might work http://www.novak-adapt.com/catalog/kit_hcr3.htm http://www.tellico4x4.com/index.php/cPath/2880_327_134 BTW i got 2 ft of hose Quote Link to comment Share on other sites More sharing options...
stockgp Posted September 1, 2007 Author Report Share Posted September 1, 2007 great info. thanks Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.