Jump to content

92 GP, PMIII? 4T60-E?


w-bodys_are_the_best

Recommended Posts

I'm going to look at a 92 Gp with 3.4, HUD, DIC, Sunroof, power everything. I was just wondering, does the 3.4 have the 4T60E in a 92 model? It says it has ABS, I assume it is PMIII since it's only a year newer than my International. What years did they use PMIII?

Link to comment
Share on other sites

PMIII was last used in 91. the 92 will have the GM ABS IV

 

ALL 3.4s had the 4t60E tranny. (stated wihtout consideration of what some claim the last year engine was mated to)

Link to comment
Share on other sites

Thanks for the reply, would this 92 4T60E work in place of my 96 CS 4T60E? It has higher miles, but as long as the engine runs good, and doesn't knock like mine, I'm goign to drive it for awhile, and drop the 3.4 in the 91 International, and possibly throw the tranny in my 96 CS, 2 cutlass's going from 1 parts car :biggrin: hopefully

Link to comment
Share on other sites

Thanks for the reply' date=' would this 92 4T60E work in place of my 96 CS 4T60E? It has higher miles, but as long as the engine runs good, and doesn't knock like mine, I'm goign to drive it for awhile, and drop the 3.4 in the 91 International, and possibly throw the tranny in my 96 CS, 2 cutlass's going from 1 parts car :biggrin: hopefully

[/quote']

it might if you re-pin the connector. the 96 probably has Pulse-Width-Modulation for the TCC(iirc). no big deal to do, I think... or maybe it only goes the other way? I'm not an expert, sorry!

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...