DavidHowell3633 Posted June 1, 2007 Report Share Posted June 1, 2007 I removed my lens and found it to be shattered. Does anyone have experience fashioning a lens from plexiglass or something similar? Does anyone need the little black rubber square buttons? Thanks, David Quote Link to comment Share on other sites More sharing options...
Psych0matt Posted June 1, 2007 Report Share Posted June 1, 2007 hardwiring that light was one of the first things i did, since the buttons were all broken anyways. my lens broke about two weeks ago, when one screw worked its way out and the one side fell, and it busted in half. as far as making a new one, havent tried yet Quote Link to comment Share on other sites More sharing options...
mitalie Posted June 1, 2008 Report Share Posted June 1, 2008 If you still have the buttons, I need them. Quote Link to comment Share on other sites More sharing options...
jeremy Posted June 1, 2008 Report Share Posted June 1, 2008 I've got a complete one that I would be willing to part with for the right offer if anyone is looking to buy one. Quote Link to comment Share on other sites More sharing options...
mitalie Posted June 1, 2008 Report Share Posted June 1, 2008 I am interested. Your in-box is full. Please send me a personal response. Thanks Quote Link to comment Share on other sites More sharing options...
jeremy Posted June 1, 2008 Report Share Posted June 1, 2008 I cleared out some room for you Quote Link to comment Share on other sites More sharing options...
Psych0matt Posted June 2, 2008 Report Share Posted June 2, 2008 shoot, i would have got them from you yesterday. oh well, don't need one that bad Quote Link to comment Share on other sites More sharing options...
oldscsc Posted June 4, 2008 Report Share Posted June 4, 2008 ^PM sent. Quote Link to comment Share on other sites More sharing options...
DavidHowell3633 Posted June 6, 2008 Author Report Share Posted June 6, 2008 Does anyone have experience fashioning a lens from plexiglass or something similar? Quote Link to comment Share on other sites More sharing options...
j_mezz Posted June 6, 2008 Report Share Posted June 6, 2008 I'm afraid to mention this because it's not quite ready for prime time yet...but I've done some things. I've actually made a mold so I could try to cast one. I Haven't made one I'm happy with yet, and I don't know if what I'm using will hold up to the heat, but I am getting close... Quote Link to comment Share on other sites More sharing options...
DavidHowell3633 Posted June 10, 2008 Author Report Share Posted June 10, 2008 Good luck with that! I will be interested in your progress. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.