dohc v6 Posted May 15, 2007 Report Posted May 15, 2007 I was wondering if the 95 + w-bodys lateral link arms fit the early gens. I have a 94 z and want tubular. I already bought the trailing arms. I am talking about the adjustable ones. Quote
pwmin Posted May 15, 2007 Report Posted May 15, 2007 not sure if anyone has actually tried them on a 1G w-body. i know they work on 1.5G, or is that what youre referring to by 95+ Quote
dohc v6 Posted May 15, 2007 Author Report Posted May 15, 2007 Well I have seen them on the bmr site. Just wondering if the stock ones or the bmr ones for that madder will fit. Quote
CSI_MuNkY Posted May 15, 2007 Report Posted May 15, 2007 Are the 95-96 stock lateral links even tubular? I didn't think they were, although I haven't gotten under my own car to look into it. I assumed that only 1.5Gen and 2nd Gen would be tubular. I'll have to take a peak under my car before I buy any new lateral links... I don't see why they wouldn't fit on earlier cars though. Jamie Quote
dohc v6 Posted May 15, 2007 Author Report Posted May 15, 2007 It looks like they are a little bigger at the bushing ends. Here is what I can see. Also held offers them. I would like to get them but not pay 110 a bar. Stock has to be cheaper. Quote
mdelorie Posted May 16, 2007 Report Posted May 16, 2007 I measured the arms on my Gramps' 2006 Impala. They are the exact same length as the arms off my 91 Lumina. I've got the BMR arms on the way, hope to have them in in the next couple weeks. Quote
dohc v6 Posted May 17, 2007 Author Report Posted May 17, 2007 Are they tubular the stock ones. I dont want to spend that kind of money with bmr. Also what about the bushing mount. Is it the same? They look to be bigger than the early gens. Quote
mdelorie Posted May 17, 2007 Report Posted May 17, 2007 Are they tubular the stock ones. I dont want to spend that kind of money with bmr. Also what about the bushing mount. Is it the same? They look to be bigger than the early gens. The picture in reply number 4 of this thread with the picture from the BMR website shows the stock arms. The black ones shown there are the stock GM arms with the adjustment on the arm itself. Quote
dohc v6 Posted May 18, 2007 Author Report Posted May 18, 2007 Yeah I know, just want to know the width of the bushing. It looks like the newer models have bigger bushings Quote
mdelorie Posted May 22, 2007 Report Posted May 22, 2007 I didn't get that far. I'm getting my arms this weekend, so I'll let you know then. If they are bigger, well I guess I'll have a set of BMR arms to be selling. Quote
mdelorie Posted May 27, 2007 Report Posted May 27, 2007 They fit! I'll be putting the whole works together this week; I'll take pictures. Quote
mdelorie Posted June 3, 2007 Report Posted June 3, 2007 I just got the works fully together today. I'll post pictures later this evening in a separate thread Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.