dohc v6 Posted May 4, 2007 Report Share Posted May 4, 2007 I have had some interest in poly control arm bushings. Anyone out there willing to spend around $120-$150 for a set of poly bushings Quote Link to comment Share on other sites More sharing options...
CSI_MuNkY Posted May 4, 2007 Report Share Posted May 4, 2007 Just for the control arms? or would the kit include other bushings as well? (I'm not even sure what other bushings would be necessary) I'm very interested in poly bushings right now, especailly if you can get them graphite impregnated (reduces squeak) I'd like to replaces as many suspenison points as possible with poly, so the more the better. My timeline right now is mid July, as I have a 3 week plant shut down, this is the only time I can afford to have the car off the road, at this time I am intending a LOT of suspension mods.... Jamie Quote Link to comment Share on other sites More sharing options...
Pabz Posted May 4, 2007 Report Share Posted May 4, 2007 I would be interested Quote Link to comment Share on other sites More sharing options...
GutlessSupreme Posted May 4, 2007 Report Share Posted May 4, 2007 $150 is a lot of money for 4 pieces of polyurethane. Quote Link to comment Share on other sites More sharing options...
dohc v6 Posted May 4, 2007 Author Report Share Posted May 4, 2007 Thats your own personal opinion, I am asking for people who are interested. And stock bushings cost 15 a piece so no they are not that much. This post is not for people to complain about the price, if your intereested post, if not shut up. Quote Link to comment Share on other sites More sharing options...
CSI_MuNkY Posted May 5, 2007 Report Share Posted May 5, 2007 so would these be made of a regular poly urathane? or could we get them made of graphite impregnated poly urathane? What about a time line? when could these possible make their way to someones door step? Jamie Quote Link to comment Share on other sites More sharing options...
5speedz34 Posted May 5, 2007 Report Share Posted May 5, 2007 Thats your own personal opinion, I am asking for people who are interested. And stock bushings cost 15 a piece so no they are not that much. This post is not for people to complain about the price, if your intereested post, if not shut up. First thing I wouldn't be such an ass. Yes they are expensive but I mean these are going to be one off set. That said, you can't get them for any cheaper? It does seem a little expensive but no biggie IMO since I'm not going to hold out for something else. I would only be interested if they where graphite impregnated. Quote Link to comment Share on other sites More sharing options...
Q-Ball Posted May 5, 2007 Report Share Posted May 5, 2007 I would only be interested if they were graphite impregnated. x2 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.