rockfangd Posted April 24, 2007 Report Posted April 24, 2007 Hi everyone i just put a codealarm car starter and alarm in my cutty but i need to find a domelight wire that is positive when the doors are closed and negative when the doors are open. Also it has domelight supervision which i also do not know how to hook up, all i know is that in order to get into program mode the door needs to be open and the key needs to be on, so i have to take the domelight wire and attach it to ground unti i get done programming. Someone must be kinda familiar with these damn modules Quote
J Posted April 24, 2007 Report Posted April 24, 2007 pm Slick AKA Chris, he just did my alarm in my 94 cutty Quote
slick Posted April 24, 2007 Report Posted April 24, 2007 Door Trigger blue - headlight switch Dome Supervision use door trigger If it HAS to be positive triggered, your gonna have to use a relay to reverse the polarity. Quote
rockfangd Posted April 24, 2007 Author Report Posted April 24, 2007 it can be either i believe. It is a codealarm module and it has polarity fuses for pos and neg. Mine is neg though right Quote
slick Posted April 25, 2007 Report Posted April 25, 2007 If you don't want to use a relay, set it to negative triggered. Quote
rockfangd Posted April 25, 2007 Author Report Posted April 25, 2007 thanks i will have to check it out Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.