Dirty Rockstar Posted April 17, 2007 Report Posted April 17, 2007 AS the title states. Is there anywhere simple I can sand clean and ground my deck? Can I snip off the screw connector and just use what's attached to the adapter harness? Thanks guys.. I just popped some nyquil, so I'm off for the night.. (Feel like shit, not abusing the drug, lol) ..Ill check the responses when I wake up! THank you! Quote
GP1138 Posted April 17, 2007 Report Posted April 17, 2007 Can I snip off the screw connector and just use what's attached to the adapter harness? That's pretty much what I do. Quote
19Cutlass94 Posted April 17, 2007 Report Posted April 17, 2007 use the ground thats one the harness and the factory ground wire... Quote
Dirty Rockstar Posted April 17, 2007 Author Report Posted April 17, 2007 Thanks guys! I was just wodering itf it was better for some reason to use a chassis ground for some reason.. Quote
Garrett Powered Posted April 17, 2007 Report Posted April 17, 2007 I usually get a 12 gauge speaker wire piece and use a heat shrink style ring terminal with a self tapping screw and make sure you sand it down real good first for a good contact. cut all but 3 inches off the ground coming out of the deck and use a posi-lock connecter there. the screw type butt connecters for quick release or add-ons. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.