john99gtp Posted April 6, 2007 Report Posted April 6, 2007 This might be an easy request for you guys. Can someone make up a list (or have a link to one) of all the shit thats needed to pull our engines. Im going to be starting to pull this beast (hopefully tonite), and I have done it before, but, I dont remember all of it, and I want to make sure its right. So....if anyone has a step by step or something, that would be great. Also, if anyone wants to help, I'll be doing it in Epping, over the course of the week. John Quote
john99gtp Posted April 6, 2007 Author Report Posted April 6, 2007 why r u pulling it? http://massclubgp.com/viewtopic.php?t=4521&sid=eddedb4bbc330651c5d6b4a076ba6746 Quote
White93z34 Posted April 6, 2007 Report Posted April 6, 2007 asumeing you know the common sense things like airbox, etc. unbolt the 3 torque converter bolts, drop the DP. bellhousing, bolts, don't forget the one PITA one on the very back. hoses, a/c compressor, fuel lines, throtle cables, dog bone mounts, the lower engine and trans mounts, starter, yanking the alternator may give you a little more wiggle room. the wiring harnases for the crank/cam sensors, and fuel rail, and coil wiring harnases. hood: optional i forget all the specifics like bolt sizes since its has been about a year since i swaped out a L67, but that should give you a decent idea of what all is involved Quote
terryk2003 Posted April 7, 2007 Report Posted April 7, 2007 Good luck john!...wish i were closer, cause i'd deffinatly come out and help!... Quote
john99gtp Posted April 7, 2007 Author Report Posted April 7, 2007 Sorry for the bad pics, its the grandparents cam Quote
slick Posted April 7, 2007 Report Posted April 7, 2007 What the hell are we looking at? Flywheel? Quote
john99gtp Posted April 7, 2007 Author Report Posted April 7, 2007 What the hell are we looking at? Flywheel? Si senor your looking at the mating of the flywheel/flexplate to the torque converter do you see those cracks in the flywheel?? ya, those dont belong. Quote
slick Posted April 7, 2007 Report Posted April 7, 2007 Ah.. shit, now I see them. Damn man. MAD POWA!!! Quote
ns87 Posted April 7, 2007 Report Posted April 7, 2007 You have terrible car luck man. Sorry to see that, best of luck Quote
john99gtp Posted April 7, 2007 Author Report Posted April 7, 2007 You have terrible car luck man. Sorry to see that, best of luck and its only going to get worse im at 149k miles on the tranny :willynilly: Ive been saving up for it tho. Quote
terryk2003 Posted April 7, 2007 Report Posted April 7, 2007 @ least its just the flexplate...get it fixed before IDD!!! Quote
terryk2003 Posted April 7, 2007 Report Posted April 7, 2007 What the hell is an Si sensor? ehh...read that again...i think it was spanish... Si Senor!...lolz Quote
Andrew Posted April 7, 2007 Report Posted April 7, 2007 What the hell is an Si sensor? ehh...read that again...i think it was spanish... Si Senor!...lolz :lol: Damn bad luck man. that sounded horrible. are you gonna get a aftermarket flexplate now? Quote
terryk2003 Posted April 7, 2007 Report Posted April 7, 2007 What the hell is an Si sensor? it goez in teh civicz wit teh v-teck yo! Quote
White93z34 Posted April 7, 2007 Report Posted April 7, 2007 that would be the third broken L67 flexplate that I have seen. Quote
RJansen658 Posted April 7, 2007 Report Posted April 7, 2007 si sensor.... speed input? shaft input? si sensor.... speed input? shaft input? LOL I'm an idiot, I penalize my self one post for this lol. Quote
J Posted April 7, 2007 Report Posted April 7, 2007 wow this thread went down the shitter pretty quick! u've had some shitty luck lately with that car, huh? Hope it all works out Quote
john99gtp Posted April 7, 2007 Author Report Posted April 7, 2007 wow this thread went down the shitter pretty quick! u've had some shitty luck lately with that car, huh? Hope it all works out Lol, why does everyone say im having bad luck!! I say its presenting learning expierences! I love the thing to much to something small like this get in the way Quote
Crazy K Posted April 7, 2007 Report Posted April 7, 2007 I too have seen a broken flexplate... on a 91 (or 92?) bucik regal with 3800. my friend had bought it a week earlier and called me in the middle of a snowstorm to pick him up. we pushed the car bumper tpo bumper to a rst stop and loked it over and discoverd the center of the flexplate had sheared loose from the converter. Quote
terryk2003 Posted April 7, 2007 Report Posted April 7, 2007 hey john, if you need an engine hoist, we have one you can borrow! Quote
john99gtp Posted April 7, 2007 Author Report Posted April 7, 2007 hey john, if you need an engine hoist, we have one you can borrow! assssssssssss Quote
terryk2003 Posted April 7, 2007 Report Posted April 7, 2007 hey john, if you need an engine hoist, we have one you can borrow! assssssssssss shouldnt you be working on that engine right now!?...quit screwing off on the net!! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.