Guest TurboSedan Posted June 6, 2003 Report Share Posted June 6, 2003 ever since i got my BYP (International Series) front bumper cover i have been wanting to add the fog lights. i noticed when i installed my HUD that i already have the plug for the fog light switch, and i went to the salvage yard to get an instrument cluster trim piece that had provisions for the fog light switch. i plugged it in and it lit up...so far so good... then yesterday i was pulling the TGP wiring harness out of the TSTE donor car. i got the lights relay box, as well as the complete harness that goes across the front of the car. i also ended up getting the wiring that goes into the firewall along with the grommet, but i had to cut it off there or else take the entire dash apart (yeah right). what's the easiest way to get the fog light switch to work the fog lights? i don't care if the fog lights turn off when i have my brights on, i just want to do this as simple as possible. any ideas much appreciated. thanks, joshua Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.