badassoldspower Posted March 31, 2006 Report Share Posted March 31, 2006 Im looking into swapping in a 3.4 DOHC into my 97. To my knowledge, my current harness will work on a 96+ DOHC, and all i need is the DOHC computer, is this correct? and also, is this swap worth the time/money/better performance, later to be turboed? Quote Link to comment Share on other sites More sharing options...
slick Posted March 31, 2006 Report Share Posted March 31, 2006 Shouldn't be a problem to bolt in. And, like mentioned, should just wire right up. But, you will have to undo some of the current harness and move some plugs around for the different sensor locations. Quote Link to comment Share on other sites More sharing options...
skiiirt Posted March 31, 2006 Report Share Posted March 31, 2006 Good luck turbo'ing it. Unless you can fabricate everything Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.