Pabz Posted October 25, 2005 Report Share Posted October 25, 2005 Another L67 thread, please dont hate me! Well i am trying to get all this information together for getting the L67 Crate Engine GM is offering. I have already sent them an email. (GM Canada) to find out how they can help me get this information. Part #12499469, I need to know what it comes with and what i will need to get. Things i am thinking are PCM, and maybe the exaust manifolds $ crossover pipe and accessories. I can definitly pick this up at the JY. Anything else you guys can think of. And ya i need a tranny, thinking of going with the 6 speed F40 tranny. I am willing to do this project and pay for it. I just need to know what i will need and how to get it. Will a dealership sell me a F40 Tranny?? Where can i get a flywheel for this as well? Would they even sell me a 4T65E? You may think i am in over my head, but i am really ambitious about this. How much to get my OD reset to 0 after this install ? I will keep yall posted with GM's response to this request. Quote Link to comment Share on other sites More sharing options...
brianteel Posted October 25, 2005 Report Share Posted October 25, 2005 come over to L67swap.com and there is lots of info as for the F40 it will bolt up. you will need custom axles, 3800 flywheel, G6 clutch?, shift cables, etc. i have a F40 in my garage that is waiting for a car to go into to. at this point i dont think the dealership is selling themm Quote Link to comment Share on other sites More sharing options...
john99gtp Posted October 26, 2005 Report Share Posted October 26, 2005 whats an F40? Quote Link to comment Share on other sites More sharing options...
john99gtp Posted October 26, 2005 Report Share Posted October 26, 2005 well, if thats the part number.... DESCRIPTION: 3800 Series II Supercharged Production Engine 12499469 3800 Series II Supercharged Production Engine This supercharged V-6 Crate Engine (RPO L67) features the following: 240 Horsepower @ 5200 RPM and 280 lb-ft @ 3600 RPM torque Sequential fuel injection Bore is 96.52 mm and Stroke is 86.36 mm with 8.5:1 compression ratio Iron Block, Iron Heads and Hydraulic roller design camshaft This engine powers the Buick Park Avenue, Chevrolet Monte Carlo This production engine includes:exhaust manifolds, intake manifold, supercharger, injectors, fuel rails, balancer, water pump and flywheel Technical Notes: Pulley, belt, p/s pump, a/c pump, starter, alternator and engine cover are not included with this engine so manis yes, acceriories no. and as far as odo goes, most states you just get a sticker put on the door jamb saying engine replaced at xx,xxx miles, but being in canda, i dunno Quote Link to comment Share on other sites More sharing options...
brianteel Posted October 26, 2005 Report Share Posted October 26, 2005 F40 is the G6 6speed trans Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.