Jump to content

Power Door Lock Problem


GP1138

Recommended Posts

Right, so my power locks suddenly stopped working. I have checked all fuses and all are good. The strange thing is, the auto unlock when I shut the key off still works! But when I put it in D, it doesn't auto lock. Again, all fuses are good, so I don't understand.

 

Any thoughts?

Link to comment
Share on other sites

I think that your problem might be with your "blue dingie thingie" as it if referred to on PFF. I think the real name is the chime module.

 

There were a few different versions:

 

89-92 Cutlass/GP/Regal boxes have an additional 2 wire connector on them for VSS input and turn signal input... this gives an audible warning if you've left your turn signal on for something like 1.2 miles.

 

93 Cutlass/GP/Regal boxes adds more wires to the extra connector to give automatic locking (but not unlocking).

 

94-96 Cutlass/GP/Regal boxes adds automatic unlocking as well

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...