adam_murphy Posted August 18, 2005 Report Posted August 18, 2005 trying to remove the tranny on my 92 lumina euro w/ abs (3 spd tranny) and seems l ike there is a crossmember in the way.. whats the best way to remove the tranny and how? thanks -Adam Quote
DaveFromColorado Posted August 18, 2005 Report Posted August 18, 2005 support the engine from above and remove the engine cradle (as the book calls for) --Dave. Quote
adam_murphy Posted August 18, 2005 Author Report Posted August 18, 2005 support the engine from above and remove the engine cradle (as the book calls for) --Dave. so i do h ave tot remove that crossmember underneith? t he tranny is unbolted just wont come out Quote
DaveFromColorado Posted August 18, 2005 Report Posted August 18, 2005 I've seen people get 'em out without pullin' the whole cradle from under the car, not sure how that happens - I've pulled a few of 'em myself and I always tend to use that method (supporting the engine and droppin' the cradle) --Dave. Quote
Guest Gp crazy Posted August 18, 2005 Report Posted August 18, 2005 save time "DROP THE CRADLE". Easy for me on my 89 gp it's alredy on the ground. The cradle washer's pulled throught the subframe. Quote
adam_murphy Posted August 18, 2005 Author Report Posted August 18, 2005 thanks ill report back if i have any other problems Quote
DaveFromColorado Posted August 18, 2005 Report Posted August 18, 2005 Adam, I notice your in MN - where abouts are ya located? (I'm out in Chaska just Southwest of the Cities) --Dave. Quote
Guest TurboSedan Posted August 18, 2005 Report Posted August 18, 2005 i say leave the cradle in place, pull the hood off and pull 'em both out the top. Quote
adam_murphy Posted August 18, 2005 Author Report Posted August 18, 2005 austin minnesota, south c entral Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.