Jump to content

Stalling problem is fixed


89 GP

Recommended Posts

Thanks to everyone who responded to my question yesterday. I ended up doing an idle relearn. Took the car for a drive and it runs good. I found a procedure for the relearn on another message board. Here it is in case someone needs it.

 

1. Reset ECM by pulling ECM fuse (underhood) for 10 sec.

2. Block wheels and put e-brake on.

3. With a/c OFF start car and put in drive.

4. If car does not start, keep trying without putting foot on accelerator.

5. Let car idle for 10 min. or until cooling fan cycles once, whichever comes first.

6. Shut off for 10sec.

7. Start engine and place in drive and idle for 5min.

8. Shut off engine.

9. Idle is now learned.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...