Vin M heads casting 10154743...

[gUiTo]

Is there a way i can use them on a 1990 Vin T block with the Vin T intake?

[GutlessSupreme]

Not without custom welding. You can use them on the block no problem, but you also would need the Vin M intake manifolds for it to just bolt up.

[gUiTo]

ok whats the big differences between the bottom of the 2 lower intakes i am checking into getting the actualy manifold that came off the heads. anyone have any pictures?

 

Thanks again!

[gUiTo]

If i cant get an upper and lower anyone have a set of vin T heads they would trade for the vin M heads that i have?

[GutlessSupreme]

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&category=36474&item=7961646154&rd=1

 

there's a lower for cheap..

 

going soon..

 

oh, I should also mention valve covers and a few other things would be needed for the swap. Do a quick search.

 

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&category=33627&item=7964139372&rd=1

 

there's a set of valve covers I just spotted as well..

[gUiTo]

ok another question did they have different cranks for the automatic and manual transmissions or can i just get an engine out of an auto car and put a pilot bushing in the crank mount my flywheel to it and have a smooth install?

 

I found a complete engine with way less miles for $150

 

Let me know if anyone wants that set of 3100 heads.

[GutlessSupreme]

Far as I know the 3.1 cranks are all the same.