SSPSU93 Posted March 12, 2005 Report Share Posted March 12, 2005 I aquired a DIC for my 95 gp gtp. I noticed that my temp was reading -40. Thanks to the patient people in this forum they explained to me that I would need to purchase a new outside temp sensor. They also explained to me that I would find some type of wirring harness close to the hood latch frame and radiator. Since my car did not have a DIC to begin with it did not have the wiring harness for the outside temp sensor(thanks to the patient people in the forum). I have come a cross an old outside temp unit with wiring. The wirng has two wires one green and one purple. My question is were can I connect these wires for my temp sensor to work? Here is an example of the wiring that I found on ebay-- http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1&item=7960693830&ssPageName=STRK:MEWA:IT Thanks for being patient with me. Quote Link to comment Share on other sites More sharing options...
Guest Anonymous Posted March 12, 2005 Report Share Posted March 12, 2005 Was this not posted 3 times already? Quote Link to comment Share on other sites More sharing options...
99RegalGS Posted March 12, 2005 Report Share Posted March 12, 2005 Yep, doesn't matter which way they go. Quote Link to comment Share on other sites More sharing options...
supreme_style21 Posted March 12, 2005 Report Share Posted March 12, 2005 IIRC, the wires I had to splice into were yellow and green, but that sensor should work. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.