gp90se Posted February 24, 2005 Report Share Posted February 24, 2005 I might go look at a 93 GTP that needs head gaskets, and frankly, i dont know where to begin on DOHC heads, only done pushrod head gaskets. How much would I be looking at from a mechanic for it 2 be done for me. Quote Link to comment Share on other sites More sharing options...
digitaloutsider Posted February 24, 2005 Report Share Posted February 24, 2005 Too much. Quote Link to comment Share on other sites More sharing options...
gp90se Posted February 24, 2005 Author Report Share Posted February 24, 2005 car has a new tranny in it, been maintained and in good shape, if I can pick it up cheap and throw some money at it so i have a daily driver, im game Quote Link to comment Share on other sites More sharing options...
cutlsp Posted February 24, 2005 Report Share Posted February 24, 2005 since you know enough about the 3.4 dohcs why not do it yourself? Quote Link to comment Share on other sites More sharing options...
digitaloutsider Posted February 24, 2005 Report Share Posted February 24, 2005 Personally, I can't imagine it being that much more difficult than any other engine. Then again, I'm probably way wrong. Quote Link to comment Share on other sites More sharing options...
gp90se Posted February 24, 2005 Author Report Share Posted February 24, 2005 since the cams sit above the head, the lifters are up there 2, there is a ton more labor involved. ill limit my non running w-bodys to the 1 GP im still workin on slowly Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.