Marcus18 Posted December 6, 2004 Report Share Posted December 6, 2004 I'm fabbing up a 3" downpipe and was wondering if anyone knew where I could get a 3" version of the thing. marcus Quote Link to comment Share on other sites More sharing options...
skalor Posted December 7, 2004 Report Share Posted December 7, 2004 I would just get one from a regular 3.1 car from a yard as they're probably the same kinda flange. Then maybe us an adapter to make it as big as you want to run. It probably can't get too big right away though so that it can still clear the springs/bolts. I thought Eclipse5302 had a full 3" exhaust on his TSTE. I could be wrong though as it was a while ago. I'm planning on an exhaust this winter so I'm interested to see what you find out. Also, I have a setup for measuring exhaust back-pressure. I wanted to measure the pressure with the full exhaust on and then with no exhaust to see if it effects the backpressure before the turbo. I have only just tried it to make sure it worked so that's why there's only a small length of tubing in it. I have more copper tubing so that I can run it into cabin. http://www.gmv6.org/images/backpressure.jpg The picture kinda suck, but I took it with my camera phone. 8) Quote Link to comment Share on other sites More sharing options...
Guest TurboSedan Posted December 7, 2004 Report Share Posted December 7, 2004 Eclipse Did have a 3 inch system!!! my Error :oops: Im going 2.5 Inch for mine what in the heck happened to Jason anyway???? Quote Link to comment Share on other sites More sharing options...
skalor Posted December 7, 2004 Report Share Posted December 7, 2004 Last I heard or saw of him he was selling the turbo 3.1 out of his cutlass in order to put an L67 in it. It's to bad to because I used his site for my 5 speed swap. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.