were do they go

[perfecseal]

While going threw my 90 tpg I found a plug in the engin bay that was slightly melted and not pluged into enything... All I can say to discribe them is that its a two wire plug that is the only other set of wires that comes out of the bundle with the cruise controle plug..

[Guest TurboSedan]

got a pic?

 

i'll take a look at my TGP harness and see if i can tell what it might be...

[TGPilot]

On my 90 TSTE there are two different 2 wire combinations coming out of the CC wire bundle. A Black and Black/white wire that goes to the wiper wash resevoir (sp?) level sensor to let you know when the fluid is low. The other 2 wire pair is Red and Blue wire that goes to the wiper wash pump to squirt your windshield... 8)

[perfecseal]

I have tons oF pics.. I like to document everything .Im a digi freek just no place to post them. Or the html coed experiance to make a page..

[mfewtrail]

Send me the picture of the plug, I'll host it. If you want to post up some pics of your TGP as well...I'll host those too(and send ya' a link if you want to make a seperate thread/post).

 

 

mfewtrail@alltel.net

[GutlessSupreme]

On my 90 TSTE there are two different 2 wire combinations coming out of the CC wire bundle. A Black and Black/white wire that goes to the wiper wash resevoir (sp?) level sensor to let you know when the fluid is low. The other 2 wire pair is Red and Blue wire that goes to the wiper wash pump to squirt your windshield... 8)

 

:withstupid:

 

sounds like its washer related

[Tim]

If this is any help, I just checked my 92 GP SE. From the Cruise bundle I have one additional connector that goes to the washer pump.

Tim

[perfecseal]

Ok well Im guessing thats it considering the washer tank and pump are gone..