Jump to content

Its painted! Now with pics!


Jcrow

Recommended Posts

I'll have to get the before pictures later, It was a RUST BUCKET! The rockers were completely rotted away along with other rot holes. Everything is new steel welded in place It took me a little over a month of working every night after work and 12 hour days on the weekends.

bjw4g

bjw3b

bjw44

<img src="http://tinypic.com/bjw4g">

<img src="http://tinypic.com/bjw3b">

<img src="http://tinypic.com/bjw44">

Im not sure if im doing these pictures right so one of them has got to work

http://tinypic.com/bjw4g

http://tinypic.com/bjw3b

http://tinypic.com/bjw44

Link to comment
Share on other sites

I'll have to get the before pictures later, It was a RUST BUCKET! The rockers were completely rotted away along with other rot holes. Everything is new steel welded in place It took me a little over a month of working every night after work and 12 hour days on the weekends.

bjw4g

bjw3b

bjw44

<img src="http://tinypic.com/bjw4g">

<img src="http://tinypic.com/bjw3b">

<img src="http://tinypic.com/bjw44">

Im not sure if im doing these pictures right so one of them has got to work

http://tinypic.com/bjw4g

http://tinypic.com/bjw3b

http://tinypic.com/bjw44

 

29hick.jpg

Link to comment
Share on other sites

I like it! The vents could have been dropped into f;ange type things like the Sunbird GT Turbos or the Z34/Turbo Prixs.. The rims.. You need some Cutty 5 spokers.. Or Int'l wheels.. But the car owns.. Whats the exhaust setup you have there?

Link to comment
Share on other sites

nice job, looking clean, was that just an exterior strip down and repaint or the full deal inside and out?

 

if you dont mind me asking how much did it run you?

 

Im looking to get repainted in a season or so here as I have some small spots and chips that are driving me crazy.

Link to comment
Share on other sites

The exhaust is stock except for turbo mufflers and no cat. I welded a pipe from behind the stock muffler over to a second muffler, the tips are some stainless advance auto specials. The new rockers were about $150 from the dealer and he told me there were only 4 of one side and 2 of the other left in the country! trunk was $60 hood and grills were $80 fender was the only decent one around and the bottom was rusted and they got $140. Paint totalled about $400-500. I needed a special prep wash because the rockers are galvanized. probably $80 in welding supplies. I'm sure there is more that I dont remember. I did not strip anything - I sanded it down with a DA sander or by hand.

Does anyone know if wheels from a '97 or newer grand prix would fit? I kind of like the twisted cross-lace wheels

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1&item=7925782229&category=33744

As for the hood vents - the gtp ones I found were non-functional! I want the air to circulate in there when the turbo goes in.

Link to comment
Share on other sites

Kick ass.. You could have gotten Z or Turbo Prix vents to become operable by opening up the supplied baffels.. But thats in the past now, and those TA ones look nice.. I woulda had em dropped in a flange myself.. Any before pics of your Cutlass?

Link to comment
Share on other sites

I think the whole thing looks nice, the (pontiac sunbird turbo/dodge spirit turbo) hood vents look damn nice, Even the rims look alright on the car - altho I think a set of 16" Z rims would look better, but the car is still damn sharp!

 

--Dave.

Link to comment
Share on other sites

The black looks damn clean! I'm like the 20 other people...my only problem is with the wheels....hey dont feel bad, everyone hates the wheels on my prix!

I don't mind the HiPo version of your wheels.. The brushed aluminum just look horrible.

Link to comment
Share on other sites

i like it!

 

the only thing i would do is something with the stance, maybe lower it an inch or two and maybe get some offset rims or some spacers (offset rims would be better)

 

but it looks awesome! im jealous

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...