Carotop Posted September 29, 2004 Report Posted September 29, 2004 Alright this is the start of my modification thread its mostly for my info on what I can do to my cutty and if people want to feel free to post questions also. Alright first off I am either gonna port my plenum or get one from a beretta or 3.4 what would be best? Also I was gonna glass bead my plenum and valve covers just to clean it up some and I'm gonna need new gaskets where can I get those from? Quote
89oldscutlass Posted September 29, 2004 Report Posted September 29, 2004 You can get your gaskets from about any parts store for your stock intake and plenium. Quote
Guest Anonymous Posted September 29, 2004 Report Posted September 29, 2004 Wow. You're gonna tear into your motor but you don't know where to get gaskets? Good luck, you're gonna need it. Quote
HokemBokem Posted September 29, 2004 Report Posted September 29, 2004 Wow. You're gonna tear into your motor but you don't know where to get gaskets? Good luck, you're gonna need it. Quote
slick Posted September 29, 2004 Report Posted September 29, 2004 Wow. You're gonna tear into your motor but you don't know where to get gaskets? Good luck, you're gonna need it. He's gonna need more than luck. BTW, do you have any tools? Quote
HokemBokem Posted September 29, 2004 Report Posted September 29, 2004 Wow. You're gonna tear into your motor but you don't know where to get gaskets? Good luck, you're gonna need it. He's gonna need more than luck. BTW, do you have any tools? Yea a few screwdrivers and a couple rachets Quote
citheman85 Posted September 29, 2004 Report Posted September 29, 2004 want me to send you some duct tape or some jb weld Quote
Carotop Posted September 30, 2004 Author Report Posted September 30, 2004 I have tons of tools at my disposal I go to public school that is good and we have a FULL auto shop with about 12 stalls and 10 lifts and tools galore I'm just slow when it comes to getting parts and I'm not a "pro" like you guys Oh yah and then I got new leather seats in my car so if anybody from MN goin to the meet wanna try and wire em up cuz I don't originally have power seats but those seats make a real change in the interior appearance Quote
DiscoStudd Posted September 30, 2004 Report Posted September 30, 2004 I got new leather seats in my car so if anybody from MN goin to the meet wanna try and wire em up cuz I don't originally have power seats but those seats make a real change in the interior appearance Bring some 16 gauge wire and various crimp-on connectors and I'll see what I can do. Shouldn't be too difficult to wire in... Quote
Carotop Posted September 30, 2004 Author Report Posted September 30, 2004 I got new leather seats in my car so if anybody from MN goin to the meet wanna try and wire em up cuz I don't originally have power seats but those seats make a real change in the interior appearance Bring some 16 gauge wire and various crimp-on connectors and I'll see what I can do. Shouldn't be too difficult to wire in... Alright well I'm prolly gonna get the wire harness tommorrow from the parts car and I might be able to do it myself or I got someone that could help me but if it doesn't work then I'll try and get you guys to do it Quote
Carotop Posted October 1, 2004 Author Report Posted October 1, 2004 Alrighty the new cold air intake is goin in tommorrow. I was havin trouble gettin the air temp. sensor to fit but finally found a way to get it in. Quote
Carotop Posted October 3, 2004 Author Report Posted October 3, 2004 Well the intake only took about 10 min. too install once I found all the tools I needed and I drove it right away and man does that seem to improve the car alot. I went from a dead stop and slammed the gas down and must have squeled my tires for a good 5 sec. before I let off on the gas man its tight Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.